No abstract

The effect of molecular weights and hydrolysis degrees (HD) of polyvinyl alcohol (PVA) on thermal and mechanical properties and crystallinity of polylactic acid (PLA)/PVA blends was investigated. Blends were prepared by the melt blending method using PLA/PVA ratios: 80/20, 90/10 and 97/3 wt. %. A single glass transition temperatures was observed for all PLA/PVA blends, suggesting the formation of binary compatible blends at concentration range studied. Thermogravimetric analysis results showed a better thermal stability for PLA/PVA blends containing PVA of higher Mw and HD. According to mechanical properties, low quantities of PVA (3 wt. %) do not affect the tensile strength of blends (irrespective of Mw and HD). However, as the PVA content increases, tensile strength tends to lower values, especially for blends with 20 wt.% of PVA, with 98% of HD.

No abstract

The influence of the carbon nanotubes (CNTs) content on the fiber/matrix interfacial shear strength (IFSS) in glass/fiber epoxy composites was measured by means of push-in and push-out tests. Both experimental methodologies provided equivalent values of the IFSS for each material. It was found that the dispersion of CNTs increased in IFSS by 19% in average with respect to the composite without CNTs. This improvement was reached with 0.3 wt.% of CNTs and increasing the CNT content up to 0.8 wt.% did not improve the interface strength.

No abstract