In the present study, the memristive characteristics of hydrothermally grown TiO 2 nanorod arrays, particularly, the difference in the retention time of the resistance state, are investigated in dependence of the array growth temperature. A volatile behavior is observed and related to a redistribution of oxygen vacancies over time. It is shown that the retention time increases for increasing array growth temperatures from several seconds up to 20 min. The relaxation behavior is also seen in the current−voltage characteristics, which do not show the common unipolar, bipolar, or complementary switching behavior. Instead, the temporal evolution depends on the duration of the applied voltage and on the nanowire growth temperature. Therefore, electronic measurements are combined with scanning electron and scanning transmission electron microscopy, so that the amount of oxygen defect-rich grain boundaries in the upper part of the nanowires can be linked to the differences in the current−voltage behavior and retention time.

Power conversion efficiencies of lead halide perovskite solar cells have rapidly increased in the decade since their emergence, reaching 25% this year. However, reliable film uniformity and device stability remain hard to achieve and often require precise compliance with complicated protocols, which hampers upscaling towards industrial applications. Here, we explore the potential of an alternative route towards high-quality perovskite films: The reaction between a pre-existing perovskite film and methylamine (MA) gas has been shown to possess the striking ability to both improve film morphology and increase grain size drastically, boosting device performance. This post-deposition treatment could provide the means to decouple film quality from the initial deposition process, thus promising to facilitate upscaling and lowering production costs. Furthermore, such MA gas treatments show great promise regarding the stability of fabricated devices, as they open up the opportunity to reduce or even eliminate the adverse role of grain boundaries in film degradation.

Memristors are deemed to be the electrical twin to biological synapses. They enable emulation of human memory functionalities such as learning, memorizing, and forgetting. The present hydrothermally grown titanium dioxide nanowire array memristive devices have shown to be able to mimic synaptic behaviors. As well as spike‐rate dependent plasticity, excitatory postsynaptic currents, and paired pulse facilitation, high endurance, and on/off ratios for the nanowire arrays are presented. Decay fitting of postsynaptic currents with Kohlrausch's equation shows lifetimes of few milliseconds up to several hundred seconds, offering the possibility of a short‐term to long‐term memory transition. Furthermore, a strong dependence of the lifetime of the signals on the frequency and amplitude of the stimulation pulses is observed.

Single nanowires and networks are considered as promising candidates for miniaturized memristive devices for brain-inspired systems. Moreover, single crystalline nanostructures are useful model systems to gain a deeper understanding in the involved switching mechanism of the investigated material. Here, we report on hydrothermally grown single crystalline Nb3O7(OH) nanowires showing a complementary resistive switching (CRS) behavior. The CRS characteristics can be related to an oxygen vacancy migration at the electrode/metal hydroxide interface. Therefore, an oxygen plasma treatment is used to reduce the oxygen vacancy content, resulting in a total reduction of the device conductivity. Furthermore, temporal resolved current–voltage measurements demonstrate the dependence of the destructive readout process of the resistance states on the voltage amplitude and polarity.

No abstract