This work evaluated the effect of cocoa pulp as a malt adjunct on the parameters of fermentation for beer production on a pilot scale. For this purpose, yeast isolated from the spontaneous fermentation of cachaça (SC52), belonging to the strain bank of the State University of Feira de Santana-Ba (Brazil), and a commercial strain of ale yeast (Safale S-04 Belgium) were used. The beer produced was subjected to acceptance and purchase intention tests for sensorial analysis. At the beginning of fermentation, 30% cocoa pulp (adjunct) was added to the wort at 12°P concentration. The production of beer on a pilot scale was carried out in a bioreactor with a 100-liter capacity, a usable volume of 60 liters, a temperature of 22°C and a fermentation time of 96 hours. The fermentation parameters evaluated were consumption of fermentable sugars and production of ethanol, glycerol and esters. The beer produced using the adjunct and yeast SC52 showed better fermentation performance and better acceptance according to sensorial analysis.

Brazil has the largest herd of goats of the American continent, with more than 9 million head. Goat farming is considered a growing and important activity for the economy, mainly in the northeastern region of Brazil .In this research, were determined the lipid content and the composition of fillet and shank fatty acids of young goats, registered in the inspection sector of the Ministry of Agriculture and marketed in the city of Salvador (Bahia). The average percentage of total lipids in the fillet was 1.68±0.04 and in the shank of 4.02±0.09, this is a significant difference between the cuts (P<0.05). Twenty-seven (27) fatty acids were identified in the cuts, most are palmitic acid (C16:0), stearic acid (C18:0) and oleic acid (C18:1ω9) present in 21.32%, 20.39%, 34.49% in the fillet and 21.74%, 21.94%, 33.38% in the shank, respectively. The total sums of saturated and polyunsaturated fatty acids ranged of 42.75 to 45.23% and 14.04 to 12.35% between fillet and shank cuts, respectively. The ratio of PUFA/SFA was 0.35 for fillet and 0.15 for shank, and the ratio ω6/ω3 was 3.07 for fillet and 2.27 for shank. Therefore, is a significant difference in total lipid content and fatty acid composition in commercial cuts of beef fillet and shank.