Energy structures from non-conventional energy source has become highly demanded nowadays. In this way, the maximum power extraction from photovoltaic (PV) systems has attracted the attention, therefore an optimization technique is necessary to improve the performance of solar systems. This paper proposes the use of ABC (artificial bee colony) algorithm for the maximum power point tracking (MPPT) of a PV system using a DC-DC converter. The procedure of the ABC MPPT algorithm is using data values from PV module, the P-V characteristic is identified and the optimal voltage is selected. Then, the MPPT strategy is applied to obtain the voltage reference for the outer PI control loop, which in turn provides the current reference to the predictive digital current programmed control. A real-time and high-speed simulator (PLECS RT Box 1) and a digital signal controller (DSC) are used to implement the hardwarein-the-loop system to obtain the results. The general system does not have a high computational cost and can be implemented in a commercial low-cost DSC (TI 28069M). The proposed MPPT strategy is compared to the conventional perturb and observe method, results show the proposed method archives a much superior performance. INDEX TERMS Maximum power point tracking, Photovoltaic system, Artificial bee colony, Hardware in the loop testing. ABBREVIATION Term Description ABC Artificial bee colony algorithm. ACO Ant colony optimization. ADE Adaptive differential evolution. ANFIS Adaptive neuro-fuzzy inference system. ANNs Artificial neural networks. BA Bat algorithm. BI Bio-inspired methods. COA Coyote optimization algorithm. DSC Digital signal controller. ESC Extremum-seeking control. FL Fuzzy logic algorithm. FPA Flower pollination algorithm. FPGA Field-programmable gate arrays. GA Genetic algorithm. HIL Hardware-in-the-loop. INC Incremental conductance algorithm. MOA Moth-flame optimization algorithm.

No abstract

This paper presents an optimal design of a surface-based polynomial fitting for tracking the maximum power point (MPPT) of a photovoltaic (PV) system, here named surface-based polynomial fitting (MPPT-SPF). The procedure of the proposed MPPT-SPF strategy is based on a polynomial model to characterize data from the PV module with a global fit. The advantage of using polynomials is that they provide a good fit within a predefined data range even though they can diverge greatly from that range. The MPPT-SPF strategy is integrated with a DC-DC boost converter to verify its performance and its interaction with different control loops. Therefore, the MPPT strategy is applied to the reference outer PI control loop, which in turn provides the current reference to the inner current loop based on a discrete-time sliding current control. A real-time and high-speed simulator (PLECS RT Box 1) and a digital signal controller (DSC) are used to implement the hardware-in-the-loop system to obtain the results. The proposed strategy does not have a high computational cost and can be implemented in a commercial low-cost DSC (TI 28069M). The proposed MPPT strategy is compared with a conventional perturb and observe method to prove its effectiveness under demanding tests.

No abstract

No abstract