Harnessing techniques from analog signal processing, we establish a new path for large-scale quantum computation.

We describe and implement a family of entangling gates activated by radio-frequency flux modulation applied to a tunable transmon that is statically coupled to a neighboring transmon. The effect of this modulation is the resonant exchange of photons directly between levels of the two-transmon system, obviating the need for mediating qubits or resonator modes and allowing for the full utilization of all qubits in a scalable architecture. The resonance condition is selective in both the frequency and amplitude of modulation and thus alleviates frequency crowding. We demonstrate the use of three such resonances to produce entangling gates that enable universal quantum computation: one iSWAP gate and two distinct controlled Z gates. We report interleaved randomized benchmarking results indicating gate error rates of 6% for the iSWAP (duration 135ns) and 9% for the controlled Z gates (durations 175 ns and 270 ns), limited largely by qubit coherence.A central challenge in building a scalable quantum computer with superconducting qubits is the execution of high-fidelity, two-qubit gates within an architecture containing many resonant elements. As more elements are added, or as the multiplicity of couplings between elements is increased, the frequency space of the design becomes crowded and device performance suffers. In architectures composed of transmon qubits [1], there are two main approaches to implementing two-qubit gates. The first utilizes fixed-frequency qubits with static couplings where the two-qubit operations are activated by applying transverse microwave drives [2][3][4][5][6][7][8]. While fixedfrequency qubits generally have long coherence times, this architecture requires satisfying stringent constraints on qubit frequencies and anharmonicities [5,6,8] which requires some tunability to scale to many qubits [9]. The second approach relies on frequency-tunable transmons, and two-qubit gates are activated by tuning qubits into and out of resonance with a particular transition [10][11][12][13][14][15][16]. However, tunability comes at the cost of additional decoherence channels, thus significantly limiting coherence times [17]. In this approach the delivery of shaped unbalanced control signals poses a challenge [15]. Such gates are furthermore sensitive to frequency crowdingavoiding unwanted crossings with neighboring qubit energy levels during gate operations limits the flexibility and connectivity of the architecture.An alternative to these approaches is to modulate a circuit's couplings or energy levels at a frequency corresponding to the detuning between particular energy levels of interest [18][19][20][21][22][23][24][25][26]. This enables an entangling gate between a qubit and a single resonator [21,22], a qubit and many resonator modes [26], two transmon qubits coupled by a tunable mediating qubit [16,25], or two tunable transmons coupled to a mediating resonator [23,24].Building on these earlier results, we implement two entangling gates, iSWAP and controlled Z (CZ), between a flux-tunable transmon an...

Using Fano-type guided resonances (GRs) in photonic crystal (PhC) slab structures, we numerically and experimentally demonstrate optical reflectivity enhancement of high-Q SiN x membrane-type resonators used in membrane-in-the-middle optomechanical (OM) systems.Normal-incidence transmission and mechanical ringdown measurements of 50-nm-thick PhC membranes demonstrate GRs near 1064 nm, leading to a ~ 4× increase in reflectivity while preserving high mechanical Q factors of up to ~ 5 × 10 6 . The results would allow improvement of membrane-in-the-middle OM systems by virtue of increased OM coupling, presenting a path towards ground state cooling of such a membrane and observations of related quantum effects.

Enabling applications for solid state quantum technology will require systematically reducing noise, particularly dissipation, in these systems. Yet, when multiple decay channels are present in a system with similar weight, resolution to distinguish relatively small changes is necessary to infer improvements to noise levels. For superconducting qubits, uncontrolled variation of nominal performance makes obtaining such resolution challenging. Here, we approach this problem by investigating specific combinations of previously reported fabrication techniques on the quality of 242 thin film superconducting resonators and qubits. Our results quantify the influence of elementary processes on dissipation at key interfaces. We report that an end-to-end optimization of the manufacturing process that integrates multiple small improvements together can produce an average T 1 = 76 ± 13 µs across 24 qubits with the best qubits having T1 ≥ 110 µs. Moreover, our analysis places bounds on energy decay rates for three fabrication-related loss channels present in state-ofthe-art superconducting qubits. Understanding dissipation through such systematic analysis may pave the way for lower noise solid state quantum computers.