Machine-type communications (MTC) are expected to play an essential role within future 5G systems. In the FP7 project METIS, MTC has been further classified into "massive Machine-Type Communication" (mMTC) and "ultra-reliable Machine-Type Communication" (uMTC). While mMTC is about wireless connectivity to tens of billions of machine-type terminals, uMTC is about availability, low latency, and high reliability. The main challenge in mMTC is scalable and efficient connectivity for a massive number of devices sending very short packets, which is not done adequately in cellular systems designed for human-type communications. Furthermore, mMTC solutions need to enable wide area coverage and deep indoor penetration while having low cost and being energy efficient. In this article, we introduce the physical (PHY) and medium access control (MAC) layer solutions developed within METIS to address this challenge.

The next wave of wireless technologies will proliferate in connecting sensors, machines, and robots for myriad new applications, thereby creating the fabric for the Internet of Things (IoT). A generic scenario for IoT connectivity involves a massive number of machine-type connections. But in a typical application, only a small (unknown) subset of devices are active at any given instant, thus one of the key challenges for providing massive IoT connectivity is to detect the active devices first and then to decode their data with low latency. This article advocates the usage of grant-free, rather than grant-based, random access scheme for the problem of massive IoT access and outlines several key signal processing techniques that promote the performance of the considered grant-free strategy, focusing primarily on advanced compressed sensing technique and its application for efficient detection of the active devices.We show that massive multiple-input multiple-output (MIMO) is especially well-suited for massive IoT connectivity in the sense that the device detection error can be driven to zero asymptotically in the limit as the number of antennas at the base station goes to infinity by using the multiple-measurement vector (MMV) compressed sensing techniques. The paper also provides a perspective on several related important techniques for massive access, such as embedding of short messages onto the device activity detection process and the coded random access.

Ultra-reliable low latency communication (URLLC) is an important new feature brought by 5G, with a potential to support a vast set of applications that rely on mission-critical links. In this article, we first discuss the principles for supporting URLLC from the perspective of the traditional assumptions and models applied in communication/information theory. We then discuss how these principles are applied in various elements of the system design, such as use of various diversity sources, design of packets and access protocols. The important messages are that there is a need to optimize the transmission of signaling information, as well as a need for a lean use of various sources of diversity.

The future connectivity landscape and, notably, the 5G wireless systems will feature Ultra-Reliable Low Latency Communication (URLLC). The coupling of high reliability and low latency requirements in URLLC use cases makes the wireless access design very challenging, in terms of both the protocol design and of the associated transmission techniques. This paper aims to provide a broad perspective on the fundamental tradeoffs in URLLC as well as the principles used in building access protocols. Two specific technologies are considered in the context of URLLC: massive MIMO and multi-connectivity, also termed interface diversity. The paper also touches upon the important question of the proper statistical methodology for designing and assessing extremely high reliability levels.

The rise of machine-to-machine communications has rekindled the interest in random access protocols as a support for a massive number of uncoordinatedly transmitting devices. The legacy ALOHA approach is developed under a collision model, where slots containing collided packets are considered as waste. However, if the common receiver (e.g., base station) is capable to store the collision slots and use them in a transmission recovery process based on successive interference cancellation, the design space for access protocols is radically expanded. We present the paradigm of coded random access, in which the structure of the access protocol can be mapped to a structure of an erasure-correcting code defined on graph. This opens the possibility to use coding theory and tools for designing efficient random access protocols, offering markedly better performance than ALOHA. Several instances of coded random access protocols are described, as well as a case study on how to upgrade a legacy ALOHA system using the ideas of coded random access.