Fibre lasers are now associated with high average powers and very high beam qualities. Both these characteristics are required by many industrial, defence and scientific applications, which explains why fibre lasers have become one of the most popular laser technologies. However, this success, which is largely founded on the outstanding characteristics of fibres as an active medium, has only been achieved through researchers around the world striving to overcome many of the limitations imposed by the fibre architecture. This Review focuses on these limitations, both past and current, and the creative solutions that have been proposed for overcoming them. These solutions have enabled fibre lasers to generate the highest diffraction-limited average power achieved to date by solid-state lasers

We report on the observation and experimental characterization of a threshold-like onset of mode instabilities, i.e. an apparently random relative power content change of different transverse modes, occurring in originally single-mode high-power fiber amplifiers. Although the physical origin of this effect is not yet fully understood, we discuss possible explanations. Accordingly, several solutions are proposed in this paper to raise the threshold of this effect.

The temporal behavior of mode instabilities in active large mode area fibers is experimentally investigated in detail. Thus, apart from the onset threshold of mode instabilities, the output beam is characterized using both high-speed camera measurements with 20,000 frames per second and photodiode traces. Based on these measurements, an empiric definition of the power threshold of mode instabilities is introduced. Additionally, it is shown that the temporal dynamics show a transition zone between the stable and the unstable regimes where well-defined periodic temporal fluctuations on ms-timescale can be observed. Finally, it is experimentally shown that the larger the mode-field area, the slower the mode-instability fluctuation is. The observations support the thermal origin of mode instabilities.

Rare earth-doped fibres are a diode-pumped, solid-state laser architecture that is highly scalable in average power. The performance of pulsed fibre laser systems is restricted due to nonlinear effects. Hence, fibre designs that allow for very large mode areas at high average powers with diffraction-limited beam quality are of enormous interest. Ytterbium-doped, rod-type, large-pitch fibres (LPF) enable extreme fibre dimensions, i.e., effective single-mode fibres with mode sizes exceeding 100 times the wavelength of the guided radiation, by exploiting the novel concept of delocalisation of higher-order transverse modes. The non-resonant nature of the operating principle makes LPF suitable for high power extraction. This design allows for an unparalleled level of performance in pulsed fibre lasers.

We report on the experimental demonstration of a fiber chirped- pulse amplification system capable of generating nearly transform-limited sub 500 fs pulses with 2.2 mJ pulse energy at 11 W average power. The resulting record peak power of 3.8 GW could be achieved by combining active phase shaping with an efficient reduction of the acquired nonlinear phase. Therefore, we used an Ytterbium-doped large-pitch fiber with a mode field diameter of 105 µm as the main amplifier.