Micro-structured optical film is one of the micro-optical elements and has a great market demand. This article studies the microstructured optical film formed by UV imprinting: The influence of embossing pressure on microstructure replication accuracy was explored. The larger the pressure, the better the material filling. When the pressure is 5N, the microstructure replication is complete; The relationship between the radiation intensity and warpage deformation was explored, and the decrease in the intensity of the UV light source can effectively reduce the warpage deformation; The influence of the material formula on the optical properties of the product was explored. When the oligomer content was 55%, the film had a high light transmittance. At the same time, the prepared film was subjected to an apparent inspection with good microstructure replication accuracy.Microstructured optical elements are widely used in optical fields such as semiconductors, lasers, beam shaping [1-2] and solar energy [3-5] due to their unique advantages such as small size and high performance. As a key component in many industries, it has a high market demand rate. However, the microstructure forming process is complicated, the manufacturing cost is high, and the accuracy is difficult to guarantee, which has restricted its development. With the advancement of science and technology and the increase in market demand, more and more researchers and enterprises have put their eyes on the research of preparing micro-structured optical elements.At present, the commonly used microstructures are mainly icrolens array [6-8], and the processing methods include micro-imprinting [9-10], etching [11], electron beam direct writing, and micro-injection [12], etc. This article studies the UV-curing embossing process in micro-embossing. This processing method has the advantages of fast molding, high efficiency, and environmental protection. And this process is conducive to mass production and has a broad market application prospect.In this paper, the forming process and material formulation of microstructured optical film prepared by light-cured micro-imprinting were investigated, and the microstructure morphology of the preparation was analyzed apparently.

During the process of the Smart Grid systems construction, the Safe Access Platform has an increasing important role. Not only could it meet the demand that people of power system can telecommute, but also provides different level of security mechanisms for various smart devices, such as Hand-hold Terminal System PDA, Ultra Mobile Personal Computer (UMPC) and Wireless Data Acquisition Terminal. Determining how to guarantee the internal security and meet the security requirements of access control based on roles is an important subject. The paper presents a new network access control system (NAC system) based on roles. According to the security metrics of the network access equipment (NAE), the NAC system has been designed and implemented to provide different safety strategies for different application scenarios. Besides, 802.1x and L2-IP are discussed specially as the most important key techniques of the implementation of the system.

In this paper, UV irradiation curing technology is used in the processing and manufacturing of micro structure parts and a micro-injection molding method of UV-curable molding was proposed to process microstructures. The special material for UV light curing injection of microstructural products was developed. The light curing reactivity of the micro injection light curing special material and its effect on the processing molding are studied. The kinetics of light curing reaction of UV curing injecting material were studied by online infrared spectroscopy (RT-IR). The contribution of mono functional monomers to the double bond conversion rate of microstructures is higher than that of high functional monomers. Under the same condition, the mono functional monomer can make the UV curing reaction more complete. Under the same process conditions, the rate of UV curing reaction of high functional monomers is higher than that of mono functional monomers.