A high-sensitive terahertz detector operating at room temperature was demonstrated based on parametric up-conversion. A nanosecond 1064-nm Nd:YAG laser was used to pump the parametric up-conversion detector and the up-conversion from terahertz wave to NIR laser was realized in a lithium niobate crystal. The minimum detectable terahertz energy of 9 pJ was realized with the detection dynamic range of 54 dB, which was three orders of magnitude higher than that of commercial Golay cell. The detectable terahertz frequency range of the detection system was 0.90 Thz–1.83 THz. Besides, the effects of pump energy and effective gain length on the detection sensitivity were studied in experiment. The results showed that higher pump energy and longer effective gain length are helpful for improving the detection sensitivity of parametric up-conversion detector.

In this Letter, we demonstrate a highly sensitive multi-stage terahertz (THz) wave parametric upconversion detector based on a KTiOPO4 (KTP) crystal pumped by a 1064-nm pulsed-laser (10 ns, 10 Hz). The THz wave was upconverted to near-infrared light in a trapezoidal KTP crystal based on stimulated polariton scattering. The upconversion signal was amplified in two KTP crystals based on non-collinear and collinear phase matching, respectively, to improve detection sensitivity. A rapid-response detection in the THz frequency ranges of 4.26–4.50 THz and 4.80–4.92 THz was achieved. Moreover, a dual-color THz wave generated from THz parametric oscillator using KTP crystal was detected simultaneously based on dual-wavelength upconversion. The minimum detectable energy of 2.35 fJ was realized with a dynamic range of 84 dB at 4.85 THz, which gives a noise equivalent power (NEP) of the order of 21.3 pW/Hz1/2. By changing the phase-matching angle or the wavelength of the pump laser, it is suggested that the detection of the THz frequency band of interest in a wide range from approximately 1 to 14 THz is possible.

With the unique advantages of mineral TCMs gradually emerging in clinical treatment, health care, and precaution, it has played an important role in the international medical market. Commonly, mineral TCMs with similar appearance and different processing methods have different effects, but they are easy to be confused in preparation, storage, transportation, and other links, which affects the use and causes related problems. In this paper, six kinds of easily confused mineral TCMs, including coral skeleton, ophicalcitum, calamine, matrii sulfas exsiccatus, gypsum, and alumen, are rapidly characterized using Raman spectroscopy, which can be distinguished with different Raman peaks at 0–300 cm−1 due to the different lattice structure. The THz spectra of these mineral TCMs show that different mineral TCMs have different THz absorption coefficients at 0.3–2.0 THz. Furthermore, compared with the ineffectiveness of the Raman spectrum for differentiating mineral TCMs prepared with disparate processing methods, the terahertz absorption spectrum plays an active role in making up the limitation of low-wavenumber Raman spectroscopy. The combination of low-wavenumber Raman and THz spectroscopy provides a simple and feasible scheme for the identification of mineral TCMs, which could play an important role in the quality control of mineral TCMs.

No abstract

No abstract