Summary The present work investigates the influence of small geometrical defects on the behavior of slender rigid blocks. A comprehensive experimental campaign was carried out on one of the shake tables of CEA/Saclay in France. The tested model was a massive steel block with standard manufacturing quality. Release, free oscillations tests as well as shake table tests revealed a non‐negligible out‐of‐plane motion even in the case of apparently plane initial conditions or excitations. This motion exhibits a highly reproducible part for a short duration that was used to calibrate a numerical geometrically asymmetrical model. The stability of this model when subjected to 2000 artificial seismic horizontal bidirectional signals was compared with the stability of a symmetrical one. This study showed that the geometrical imperfections slightly increase the rocking and overturning probabilities for earthquake signals in a narrow range of peak ground acceleration. Copyright © 2016 John Wiley & Sons, Ltd.

No abstract

The paper presents an experimental and numerical investigation of the earthquake response of crane bridges. The main contributions of the authors to this field consist in: carrying out an experimental campaign on a model of a crane bridge;  determining a relevant similarity for the seismic tests which preserves the ratios of seismic forces to friction forces and of seismic forces to gravity forces, without added masses; interpreting the experimental results by means of numerical analysis for both low and high excitation intensities; proposing a simplified model of the crane bridge which could be used as a part of a bigger model to account for possible interaction between the supporting main structure and the crane bridge.

Abstract. The present work investigates on the influence of small geometrical defects on the behavior of slender rigid blocks. A comprehensive experimental campaign was carried out on one of the shake tables of CEA/Saclay in France. The tested model was a massive steel block with standard manufacturing quality. Release, free oscillations tests as well as shake table tests revealed a non-negligible out-of-plane motion even in the case of apparently plane initial conditions or excitations. This motion exhibits a highly reproducible part for a short duration that was used to calibrate a numerical geometrically asymmetrical model. The stability of this model when subjected to 2 000 artificial seismic horizontal bidirectional signals was compared to the stability of a symmetrical one. This study showed that the geometrical imperfections slightly increase the rocking and overturning probabilities under bidirectional seismic excitations in a narrow range of peak ground acceleration.

No abstract