Cellulose nanocrystals and cellulose nanofibers with I and II crystalline allomorphs (designated as CNC I, CNC II, CNF I, and CNF II) were isolated from bleached wood fibers by alkaline pretreatment and acid hydrolysis. The effects of concentration, particle size, surface charge, and crystal structure on the lyophilization-induced self-assembly of cellulose particles in aqueous suspensions were studied. Within the concentration range of 0.5 to 1.0 wt %, cellulose particles self-organized into lamellar structured foam composed of aligned membrane layers with widths between 0.5 and 3 μm. At 0.05 wt %, CNC I, CNF I, CNC II, and CNF II self-assembled into oriented ultrafine fibers with mean diameters of 0.57, 1.02, 1.50, and 1.00 μm, respectively. The size of self-assembled fibers became larger when more hydroxyl groups and fewer sulfates (weaker electrostatic repulsion) were on cellulose surfaces. Possible formation mechanism was inferred from ice growth and interaction between cellulose nanoparticles in liquid-crystalline suspensions.

No abstract

An electrospinning process was successfully used to fabricate polyethylene oxide/cellulose nanocrystal (PEO/CNC) composite nanofibrous mats. Transition of homogeneous to heterogeneous microstructures was achieved by tailoring the concentration of PEO/CNC mixture in the solution from 5 to 7 wt %. Morphology investigation of the obtained nanofibers demonstrated that rod-shaped CNCs were well-dispersed in the as-spun nanofibers and highly aligned along the nanofiber long-axis. PEO/CNC nanofibers became more uniform and smaller in diameter with increased CNC-loading level. The heterogeneous composite mats were composed of rigid-flexible bimodal nanofibers. Results of structure characterization indicated that the incorporated CNCs interacted strongly with the PEO matrix through hydrogen bonding. Mechanical properties of both types of mats were effectively improved by using CNCs, with heterogeneous mats being stronger than their homogeneous counterparts for all compositions (0-20 wt % CNC contents). When a smaller diameter needle was used to form homogeneous mats, enhanced thermal and mechanical properties were obtained.

Electrospun fibrous bio-nanocomposite scaffolds reinforced with cellulose nanocrystals (CNCs) were fabricated by using maleic anhydride (MAH) grafted poly(lactic acid) (PLA) as matrix with improved interfacial adhesion between the two components. Morphological, thermal, mechanical, and in vitro degradation properties as well as basic cytocompatibility using human adult adipose derived mesenchymal stem cells (hASCs) of MAH grafted PLA/CNC (i.e., MPLA/CNC) scaffolds were characterized. Morphological investigation indicated that the diameter and polydispersity of electrospun MPLA/CNC nanofibers were reduced with the increased CNC content. The addition of CNCs improved both the thermal stability and mechanical properties of MPLA/CNC composites. The MPLA/CNC scaffolds at the 5 wt % CNC loading level showed not only superior tensile strength (more than 10 MPa), but also improved stability during in vitro degradation compared with the MPLA and PLA/CNC counterparts. Moreover, the fibrous MPLA/CNC composite scaffolds were non-toxic to hASCs and capable of supporting cell proliferation. This study demonstrates that fibrous MPLA/CNC bio-nanocomposite scaffolds are biodegradable, cytocompatible, and possess useful mechanical properties for bone tissue engineering.

No abstract