A new ion source based on dielectric barrier discharge was developed as an alternative ionization source for ambient mass spectrometry. The dielectric barrier discharge ionization source, termed as DBDI herein, was composed of a copper sheet electrode, a discharge electrode, and a piece of glass slide in between as dielectric barrier as well as sample plate. Stable low-temperature plasma was formed between the tip of the discharge electrode and the surface of glass slide when an alternating voltage was applied between the electrodes. Analytes deposited on the surface of the glass slide were desorbed and ionized by the plasma and the ions were introduced to the mass spectrometer for mass analysis. The capability of this new ambient ion source was demonstrated with the analysis of 20 amino acids, which were deposited on the glass slide separately. Protonated molecular ions of [M + H](+) were observed for all the amino acids except for L-arginine. This ion source was also used for a rapid discrimination of L-valine, L-proline, L-serine and L-alanine from their mixture. The limit of detection was 3.5 pmol for L-alanine using single-ion-monitoring (SIM). Relative standard deviation (RSD) was 5.78% for 17.5 nmol of L-alanine (n = 5). With the advantages of small size, simple configuration and ease operation at ambient conditions, the dielectric barrier discharge ion source would potentially be coupled to portable mass spectrometers.

Molecular analysis at cellular and subcellular levels, whether on selected molecules or at the metabolomics scale, is still a challenge now. Here we propose a method based on probe ESI mass spectrometry (PESI-MS) for single cell analysis. Detection of metabolites at cellular and subcellular levels was successfully achieved. In our work, tungsten probes with a tip diameter of about 1 μm were directly inserted into live cells to enrich metabolites. Then the enriched metabolites were directly desorbed/ionized from the tip of the probe for mass spectrometry (MS) detection. The direct desorption/ionization of the enriched metabolites from the tip of the probe greatly improved the sensitivity by a factor of about 30 fold compared to those methods that eluted the enriched analytes into a liquid phase for subsequent MS detection. We applied the PESI-MS to the detection of metabolites in single Allium cepa cells. Different kinds of metabolites, including 6 fructans, 4 lipids, and 8 flavone derivatives in single cells, have been successfully detected. Significant metabolite diversity was observed among different cells types of A. cepa bulb and different subcellular compartments of the same cell. We found that the inner epidermal cells had about 20 fold more fructans than the outer epidermal cells, while the outer epidermal cells had more lipids. We expected that PESI-MS might be a candidate in the future studies of single cell "omics".

Trace amounts of explosives on solid surfaces were detected by mass spectrometry at ambient conditions with a new technique termed dielectric barrier discharge ionization (DBDI). By the needle-plate discharge mode, a plasma discharge with energetic electrons was generated, which could launch the desorption and ionization of the explosives from solid surfaces. Hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX), 2,4,6-trinitrotoluene (TNT), and pentaerythritol tetranitrate (PETN) were desorbed directly from the explosives-contaminated surface by DBDI, forming the typical anions of [TNT](-), [TNT - H](-), [RDX + NO(2)](-), [PETN + ONO(2)](-), and [RDX + ONO(2)](-). The ions were transferred into the MS instrument for analysis in the negative ion mode. The detection limit of present method was 10 pg for TNT (m/z 197, S/N 8 : 1), 0.1 ng for RDX (m/z 284, S/N 10 : 1), and 1 ng for PETN (m/z 260, S/N 12 : 1). The present method allowed the detection of trace explosives on various matrices, including paper, cloth, chemical fiber, glass, paints, and soil. A relative standard deviation of 5.57% was achieved by depositing 100 pg of TNT on these matrices. The analysis of A-5, a mixture of RDX and additives, has been carried out and the results were consistent with the reference values. The DBDI-MS method represents a simple and rapid way for the detection of explosives with high sensitivity and specificity, which is especially useful when they are present in trace amounts on ordinary environmental surfaces.

In this paper, we have constructed a low temperature plasma (LTP) probe using dielectric barrier discharge (DBD) and employed it for the detection of explosives on a variety of substrates under ambient conditions. Upon discharge, a transient, low-temperature non-equilibrium plasma comprising ions, electrons and metastable atoms are generated between the electrodes. Three common explosives, 2,4,6-trinitrotoluene (TNT), hexahydro-1,3,5-trinitro-1,3,5-trinitro-1,3,5-triazine (RDX), and pentaerythritol tetranitrate (PETN), were directly desorbed and ionized from solid surfaces, followed by subsequent analysis using the mass spectrometer in the negative ion mode. Limits of detection (LODs) were 500 fg for TNT, 1 pg for RDX, and 500 fg for PETN. The reliability of the method was characterized by a successful analysis of a mixture of the three explosives. The ion source also allowed direct detection of trace explosives on both conductive and non-conductive substrates, thus expanding the applicability of low temperature plasma desorption mass spectrometry.

What a picture! Imaging mass spectrometry of seal patterns on paintings and calligraphy was achieved by using a mass spectrometric technique with a low‐temperature plasma probe. The non‐invasive probe can distinguish genuine seals from counterfeit examples with good spatial resolution.