The primary wind turbines’ in-service performance evaluation method is mining and analyzing the SCADA data. However, there are complex mathematical and physical relationships between multiple operating parameters, and so far, there is a lack of systematic understanding. To solve this issue, the distribution of wind turbines’ operating parameters was first analyzed according to the characteristics of the energy flow of wind turbines. Then, the correlation calculation was performed using the Spearman correlation coefficient method based on the minute-level data and second-level data. According to the numerical characteristics of the nacelle vibration acceleration, the data preprocessing technology sliding window maximum (SWM) was proposed during the calculation. In addition, taking temperature correlation as an example, two-dimensional scatter (including single-valued scatter) and three-dimensional scatter features were combined with numerical analysis and physical mechanism analysis to understand the correlation characteristics better. On this basis, a quantitative description model of the temperature characteristics of the gearbox oil pool was constructed. Through this research work, the complex mathematical and physical relationships among the multi-parameters of the wind turbines were comprehensively obtained, which provides data and theoretical support for the design, operation, and maintenance.

Data pre-processing is the first step of using SCADA data to study the performance of wind turbines. However, there is a lack of knowledge of how to obtain more effective data pre-processing algorithms. This paper fully explores multiple data pre-processing algorithms for power curve modeling. A three-stage data processing mode is proposed, namely, preliminary data filtering and compensation (Stage I), secondary data filtering (Stage II), and single-valued processing (Stage Ⅲ). Different data processing algorithms are selected at different stages and are finally merged into nine data processing algorithms. A novel evaluation method based on energy characteristic consistency (ECC) is proposed to evaluate the reliability of various algorithms. The influence of sliding mode and benchmark of Binning on data processing has been fully investigated through indicators. Four wind turbines are selected to verify the advantages and disadvantages of the nine data processing methods. The result shows that at the same wind speed, the rotational speed and power values obtained by MLE (maximum likelihood estimation) are relatively high among the three single-valued methods. Among the three outlier filtering methods, the power value obtained by KDE (kernel density estimation) is relatively large. In general, KDE-LSM (least square method) has good performance in general. The sum of four evaluating index values obtained by KDE-LSM from four wind turbines is the smallest.

Due to reduced manufacturing, transportation, and installation costs, the two-blade wind turbines (Two-BWT) are a viable option for offshore wind farms. So far, there is no mature design model for offshore Two-BWT. This paper proposes an aerodynamic design method for offshore Two-BWT blades using the blade element momentum (BEM) theory. This method calculates the power coefficient of the Two-BWT by analogy with the three-blade wind turbines (Three-BWT), and then determines the wind rotor diameter. Then, the airfoil, chord length, and twist angle are taken as the key design factors. Furthermore, the piecewise combination method (PCM) for airfoil distribution, the three-point sine method (Three-PSM) for chord length distribution, and the two-point sine method (Two-PSM) for torsion angle distribution are adopted, respectively. Subsequently, the minimum rotational speed, under the rated wind speed and rated power, is taken as the optimization objective to establish the optimization model. The global flow field of Two-BWT is constructed based on CFD technology, and the characteristics of wind speed distribution and blade pressure distribution in the flow field are investigated. Finally, the CFD results are compared with the results of the BEM theory, and the consistency of the results also shows the feasibility of the design method.