Interminable surveillance and reconnaissance through various sophisticated multispectral detectors present threats to military equipment and manpower. However, a combination of detectors operating in different wavelength bands (from hundreds of nanometers to centimeters) and based on different principles raises challenges to the conventional single-band camouflage devices. In this paper, multispectral camouflage is demonstrated for the visible, mid-infrared (MIR, 3–5 and 8–14 μm), lasers (1.55 and 10.6 μm) and microwave (8–12 GHz) bands with simultaneous efficient radiative cooling in the non-atmospheric window (5–8 μm). The device for multispectral camouflage consists of a ZnS/Ge multilayer for wavelength selective emission and a Cu-ITO-Cu metasurface for microwave absorption. In comparison with conventional broadband low emittance material (Cr), the IR camouflage performance of this device manifests 8.4/5.9 °C reduction of inner/surface temperature, and 53.4/13.0% IR signal decrease in mid/long wavelength IR bands, at 2500 W ∙ m−2 input power density. Furthermore, we reveal that the natural convection in the atmosphere can be enhanced by radiation in the non-atmospheric window, which increases the total cooling power from 136 W ∙ m−2 to 252 W ∙ m−2 at 150 °C surface temperature. This work may introduce the opportunities for multispectral manipulation, infrared signal processing, thermal management, and energy-efficient applications.

No abstract

Near-eye display (NED) systems for virtual reality (VR) and augmented reality (AR) have been rapidly developing; however, the widespread use of VR/AR devices is hindered by the bulky refractive and diffractive elements in the complicated optical system as well as the visual discomfort caused by excessive binocular parallax and accommodation-convergence conflict. To address these problems, an NED system combining a 5 mm diameter metalens eyepiece and a three-dimensional (3D), computer-generated holography (CGH) based on Fresnel diffraction is proposed in this paper. Metalenses have been extensively studied for their extraordinary capabilities at wavefront shaping at a subwavelength scale, their ultrathin compactness, and their significant advantages over conventional lenses. Thus, the introduction of the metalens eyepiece is likely to reduce the issue of bulkiness in NED systems. Furthermore, CGH has typically been regarded as the optimum solution for 3D displays to overcome limitations of binocular systems, since it can restore the whole light field of the target 3D scene. Experiments are carried out for this design, where a 5 mm diameter metalens eyepiece composed of silicon nitride anisotropic nanofins is fabricated with diffraction efficiency and field of view for a 532 nm incidence of 15.7% and 31°, respectively. Furthermore, a novel partitioned Fresnel diffraction and resample method is applied to simulate the wave propagations needed to produce the hologram, with the metalens capable of transforming the reconstructed 3D image into a virtual image for the NED. Our work combining metalens and CGH may pave the way for portable optical display devices in the future.

Metasurfaces have been widely investigated for their capabilities of manipulating wavefront versatilely and miniaturizing traditional optical elements into ultrathin devices. In this study, a nanoscale tunable beam splitter utilizing a bilayer of geometric metasurfaces in the visible spectrum is proposed and numerically examined. Inspired by the diffractive Alvarez lens and multilayer geometric metasurfaces, opposite quadratic phase distributions are imparted on both layers, and a varying linear phase gradient will arise through relatively lateral displacement between two layers, generating tunable angles of deflection. In addition, such geometric metasurfaces offer opposite directions of phase gradients for orthogonal circularly polarized incidences, leading to effective polarization beam splitting. Results prove that the splitting angles can be tuned precisely, and the energy split ratio can be effectively changed according to the ellipticity of the polarized incidence. This design could find significant applications in optical communication, measurement, display, and so on.