Amorphous Si (a-Si) shows potential advantages over crystalline Si (c-Si) in lithium-ion batteries, owing to its high lithiation potential and good tolerance to intrinsic strain/stress. Herein, porous a-Si has been synthesized by a simple process, without the uses of dangerous or expensive reagents, sophisticated equipment, and strong acids that potential cause environment risks. These porous a-Si particles exhibit excellent electrochemical performances, owing to their porous structure, amorphous nature, and surface modification. They deliver a capacity of 1025 mAh g at 3 A g after 700 cycles. Moreover, the reversible capacity after electrochemical activation, is quite stable throughout the cycling, resulting in a capacity retention about around 88 %. The direct comparison between a-Si and c-Si anodes clearly supports the advantages of a-Si in lithium-ion batteries.

Sodium ion batteries (NIBs) and potassium ion batteries (KIBs) are promising candidates for large‐scale energy storage systems, with a similar “rocking chair” working principle to lithium ion batteries due to their earth abundance and lower cost. One of the major challenges in NIB research is the search for suitable anode materials with long lifetimes and high specific capacities. The research on KIBs is still in its infancy. Titanium‐based anodes present low lattice strain, high safety, and overall stability during cycling, which make them promising for large‐scale systems, especially for stationary batteries. In this review, the latest progress on titanium‐based anodes for NIBs and KIBs is summarized, including titanium dioxide and its composite, Na x TiO2 systems, NaTi2(PO4)3, titanates, and MXenes. The synthesis methods, modification methods, and sodium or potassium ion storage mechanisms of titanium‐based anodes are detailed; also the current challenges and future opportunities are discussed.

Flower-like assembly of ultrathin nanosheets composed of anatase and bronze TiO embedded in carbon is successfully synthesized by a simple solvothermal reaction, followed with a high-temperature annealing. As an anode material in sodium-ion batteries, this composite exhibits outstanding electrochemical performances. It delivers a reversible capacity of 120 mA h g over 6000 cycles at 10 C. Even at 100 C, there is still a capacity of 104 mA h g. Besides carbon matrix and hierarchical structure, abundant interfaces between anatase and bronze greatly enhance the performance by offering additional sites for reversible Na storage and improving the charge-transfer kinetics. The interface enhancements are confirmed by discharge/charge profiles, rate performances, electrochemical impedance spectra, and first-principle calculations. These results offer a new pathway to upgrade the performances of anode materials in sodium-ion batteries.

Sodium metal anode exhibits great potential in next-generation high-energy-density batteries due to its high theoretical capacity (1165 mA h g-1) at low redox potential (-2.71 V versus standard hydrogen...