With the increasing generation of medical waste worldwide, managing medical waste has become crucial, given its potential environmental and public health risks. Previously in the Republic of Korea, medical waste was often mixed with municipal waste and disposed of in residential landfills or unsuitable treatment facilities (e.g., improperly managed incinerators). Environmental regulators and waste producers have made extensive efforts in recent years to improve waste management at healthcare facilities. This study presents an overview of the status of medical waste management in Korea and discusses information on the generation, composition, separation, transportation, and treatment of medical waste. Incineration was confirmed to be the most preferred treatment method for medical waste and was the only one used until late 2005. Large-scale medical waste incinerators are used for treating medical waste from most medical facilities in Korea; however, with increasing regulations on toxic air emissions (e.g., dioxins and furans), air emission standards are being tightened for all existing small-scale incineration facilities without air pollution control. Since medical waste usually contains various plastic materials such as polyvinyl chloride, these incinerators are highly likely to emit toxic air pollutants if improperly operated and managed. Waste minimization and recycling, control of toxic air emissions from medical waste incinerators, and alternative treatment methods to incineration are seen as major challenges. Incineration capacity cannot be expanded as quickly as the rising quantities of medical waste in Korea; thus, there is a growing need to reconsider the overall management system. Accordingly, we examined various medical waste treatment policies and methods that are being implemented in other countries, in addition to the main strategy of waste management. To determine preferable directions for the improvement of the medical waste management system, we investigated and compared the status of domestic and foreign waste management and proposed directions for improvement, focusing on several issues related to the current medical waste management system in Korea.

The Ministry of Environment, South Korea, is involved in efforts to reduce safety-related accidents that could occur during hazardous waste disposal and minimise the environmental impacts of waste disposal. To reach such goals, new factors have been added that contribute to the hazardous characteristics of hazardous waste. The Ministry is also expanding regulations on inorganic and organic components present in hazardous waste for these factors and continues to correct the classification system to establish standards for waste components. Metallic dust, for example, is mostly generated during the operation of melting furnaces or precipitators and dangerous materials contained in this dust may cause accidents, such as explosions or fires. South Korean accident cases have confirmed that waste containing hazardous materials, such as Mg, Al and Mg–Al alloys, can cause such events. Therefore, this study analysed 28 dust samples collected from the dust accumulated in precipitators in 28 metal manufacturing facilities in South Korea. Nine samples were flammable and four samples were reactive to water. Two samples also exhibited leaching toxicities. The results applied to relevant laws in South Korea showed that the proportion of waste containing hazardous characteristics increased from 7.14% in the previous management category to 39.29% in the extended category, an overall increase of 32.15 percentage points.

Depletion of natural resources and reduction of greenhouse gas emissions are an important issue which we have to solve. The recycling of waste has emerged as a global concern. In Korea, the development of cost-effective treatment and recycling technologies also need to be improved. In this study, we compared and analyzed the cost per unit of treatment and recycling of organic waste, and presented an effective recycling scheme. We investigated the current status of treatment and costs for six types of organic wastes from 80 workplaces, including organic wastewater treatment sludge, processed organic sludge, and plant residues. In addition, environmental costs for greenhouse gas reduction were calculated. It's an economic way that organic waste is composted and used as cement additives.In particular, the economic analysis was done by realistic results of the survey target companies. In conclusion, in order for reliable processing and recycling of organic wastes, wastewater treatment sludge and sewage sludge need to be classified based on hazard characteristics. Finally, technical difficulties need to be further resolved such as odors, leachate, and debris on recycling organic wastes.

No abstract