Nowadays, fused deposition modeling additive technology is becoming more and more popular in parts manufacturing due to its ability to reproduce complex geometries with many different thermoplastic materials, such as the TPU. On the other hand, objects obtained through this technology are mainly used for prototyping activities. For this reason, analyzing the functional behavior of FDM parts is still a topic of great interest. Many studies are conducted to broaden the spectrum of materials used to ensure an ever-increasing use of FDM in various production scenarios. In this study, the effects of several phenomena that influence the mechanical properties of printed lattice structures additively obtained by FDM are evaluated. Three different configurations of lattice structures with designs developed from unit cells were analyzed both experimentally and numerically. As the main result of the study, several parameters of the FDM process and their correlation were identified as possible detrimental factors of the mechanical properties by about 50% of the same parts used as isotropic cell solids. The best parameter configurations in terms of mechanical response were then highlighted by numerical analysis.

This paper analyzes the effect of thin and thick walls on functional properties of 3D printed cell structures, designed from open cell structures inspired by the natural world. Different types of unit cells with the same density are introduced. The cells are studied in morphology and mechanical performance, in particular effective density, compressive stiffness, and energy absorption under cyclic loading. Material extrusion process with thermoplastic polyurethane filament is used as additive manufacturing technique, without any support structure. The designed printed cellular structures are studied numerically, using an advanced hyperelastic material model with hysteretic capacity, and experimentally by uniaxial compression testing for characterization of stiffness and energy absorption. The benefits and limitations of the method are highlighted.

This study analyses the energy absorption and stiffness behaviour of 3D-printed supportless, closed-cell lattice structures. The unit cell design is bioinspired by the sea urchin morphology having organism-level biomimicry. This gives rise to an open-cell lattice structure that can be used to produce two different closed-cell structures by closing the openings with thin or thick walls, respectively. In the design phase, the focus is placed on obtaining the same relative density with all structures. The present study demonstrates that closure of the open-cell lattice structure enhances the mechanical properties without affecting the functional requirements. Thermoplastic polyurethane (TPU) is used to produce the structures via additive manufacturing (AM) using fused filament fabrication (FFF). Uniaxial compression tests are performed to understand the mechanical and functional properties of the structures. Numerical models are developed adopting an advanced material model aimed at studying the hysteretic behaviour of the hyperelastic polymer. The study strengthens design principles for closed-cell lattice structures, highlighting the fact that a thin membrane is the best morphology to enhance structural properties. The results of this study can be generalised and easily applied to applications where functional requirements are of key importance, such as in the production of lightweight midsole shoes.