With the unique properties such as high surface area to volume ratio, stability, inertness, ease of functionalization, as well as novel optical, electrical, and magnetic behaviors, nanomaterials have a wide range of applications in various fields with the common types including nanotubes, dendrimers, quantum dots, and fullerenes. With the aim of providing useful insights to help future development of efficient and commercially viable technology for large-scale production, this review focused on the science and applications of inorganic and organic nanomaterials, emphasizing on their synthesis, processing, characterization, and applications on different fields. The applications of nanomaterials on imaging, cell and gene delivery, biosensor, cancer treatment, therapy, and others were discussed in depth. Last but not least, the future prospects and challenges in nanoscience and nanotechnology were also explored.

Adsorption technology has led to the development of promising techniques to purify biogas, i.e., biomethane or biohydrogen. Such techniques mainly depend on the adsorbent ability and operating parameters. This research focused on adsorption technology for upgrading biogas technique by developing a novel adsorbent. The commercial coconut shell activated carbon (CAC) and two types of gases (H 2 S/N 2 and H 2 S/N 2 /CO 2 ) were used. CAC was modified by copper sulfate (CuSO 4 ), zinc acetate (ZnAc 2 ), potassium hydroxide (KOH), potassium iodide (KI), and sodium carbonate (Na 2 CO 3 ) on their surface to increase the selectivity of H 2 S removal. Commercial H 2 S adsorbents were soaked in 7 wt.% of impregnated solution for 30 min before drying at 120°C for 24 h. The synthesized adsorbent’s physical and chemical properties, including surface morphology, porosity, and structures, were characterized by SEM-EDX, FTIR, XRD, TGA, and BET analyses. For real applications, the modified adsorbents were used in a real-time 0.85 L single-column adsorber unit. The operating parameters for the H 2 S adsorption in the adsorber unit varied in L/D ratio (0.5–2.5) and feed flow rate (1.5–5.5 L/min) where, also equivalent with a gas hourly space velocity, GHSV (212.4–780.0 hour -1 ) used. The performances of H 2 S adsorption were then compared with those of the best adsorbent that can be used for further investigation. Characterization results revealed that the impregnated solution homogeneously covered the adsorbent surface, morphology, and properties (i.e., crystallinity and surface area). BET analysis further shows that the modified adsorbents surface area decreased by up to 96%. Hence, ZnAc 2 –CAC clarify as the best adsorption capacity ranging within 1.3–1.7 mg H 2 S/g, whereby the studied extended to adsorption-desorption cycle.

No abstract

No abstract