The local pH variation near the surface of CO2 reduction electrodes is important but hard to study. We develop a continuous-flow Raman electrochemical cell that enables the first experimental study of the local pH near a CO2 reduction gas diffusion electrode under reaction conditions. At zero current, CO2 chemically reacts with the 1 M KOH electrolyte at the interface to form HCO3 – and CO3 2–. The local pH on the cathode surface is 7.2, and the HCO3 – concentration profile extends a distance of 120 μm into the electrolyte, which verifies that the nominal overpotential reduction from using alkaline electrolyte originates from the Nernst potential of the pH gradient layer at the cathode/electrolyte interface. The CO2–OH– neutralization reaction and the pH gradient layer still persist, albeit to a reduced extent, at CO2 reduction current densities up to 150 mA/cm2.

No abstract

Graphyne sheet exhibits promising potential for nanoscale desalination to achieve both high water permeability and salt rejection rate. Extensive molecular dynamics simulations on pore-size effects suggest that γ-graphyne-4, with 4 acetylene bonds between two adjacent phenyl rings, has the best performance with 100% salt rejection and an unprecedented water permeability, to our knowledge, of ~13 L/cm2/day/MPa, 3 orders of magnitude higher than prevailing commercial membranes based on reverse osmosis, and ~10 times higher than the state-of-the-art nanoporous graphene. Strikingly, water permeability across graphyne exhibits unexpected nonlinear dependence on the pore size. This counter-intuitive behavior is attributed to the quantized nature of water flow at the nanoscale, which has wide implications in controlling nanoscale water transport and designing highly effective membranes.