No abstract

The dynamics of plasma and ejection characteristics of spheromaks produced by a magnetized coaxial plasma gun are studied. By placing three magnetic probes at various axial positions, the distribution of current paths in the gun is found to vary in two distinct discharge modes. During the first half-period of a discharge, the plasma moves forward in the form of a current sheet, while the diffuse distribution of current paths in the second half-period indicates a deflagration mode. The evolution images and photodiode signals of the plasma show that only a single spheromak is ejected during the entire discharge. This is because the diffuse current paths reduce the J×B Lorentz force on the leading-edge plasma, which cannot be ejected from the gun. In addition, the existence of kinks in the plasma flow in two discharge modes proves that the instability is driven by Er×Bz drift, which causes rotation of the central column. Spheromak velocities increase linearly with discharge current amplitude but are inversely proportional to the gas puff mass. In ejected spheromaks, both toroidal and poloidal magnetic fields are axisymmetric, with field strength increasing with discharge current. During magnetic reconnection events, the toroidal electric field Vz×Br drives toroidal current that generates an additional poloidal field that amplifies the starting magnetic field in the spheromak plasma. This study clarifies the relationship between the formation of a single spheromak and the current distribution, and also provides a new way to optimize the spheromak's injection performance.

Coaxial gun can produce high-speed and high-density plasma jet and has some potential applications in many research areas such as space thruster, space debris impact simulation, nuclear fusion, and material processing. The coaxial gun is usually composed of a pair of coaxial cylindrical and hollow electrodes. The pulsed discharge of coaxial gun has two discharge modes, i.e., deflagration mode and pre-fill mode. Compared with the pre-fill mode, deflagration discharge mode can induce a plasma jet with few impurities, high collimation, and fast speed. In this paper, the effect of gas injection mass and discharge voltage on the discharge characteristic of deflagration mode are studied with electrical and optical diagnosis including the emission spectrum, plasma velocity and discharge current measurements. The experimental results show that when the gas injection mass is relatively low, such as 1.4 mg, many plasma clusters eject from the muzzle. As the gas flowing into the coaxial gun bottom increases, the plasma density increases and the jet velocity decreases. Eventually, when the gas injection mass increases to 2.6 mg, one cluster of plasma is found and ejects from the muzzle of the gun. In the discharge process, as a small quantity of gas flows into the bottom of the coaxial gun through the electromagnetic valve continuously, new current paths will be generated at the bottom of the coaxial gun and move forward. This results in the observation of multiple plasma jet at the exit of the coaxial gun. It is noted that the plasma densities are different for different gas mass flowing into coaxial gun bottom, but the currents have little effect in the first discharge half cycle due to the small plasma inductance in discharge circuit. Meanwhile, the plasma characteristics under different voltages with the fixed gas mass of 2.6 mg flowing into the coaxial gun bottom are experimentally measured. The results show that the plasma density and speed increase with voltage increasing, which is attributed to the stronger discharge current and larger self-induced Lorentz force. More neutral particles can be ionized into plasma with discharge voltage increasing, and the transport speed becomes faster under the enhanced force. In addition, the multiple ionization phenomena are observed again when the discharge voltage increases from 5 kV to 8 kV. This study provides an insight into how to better apply the coaxial gun discharge plasma to practical engineering field. The article further verifies the phenomenon of multiple discharges at the bottom of the coaxial gun by changing the charging capacitance and analyzing the magnetic probe signals.

The coaxial gun plasma generated by pulsed discharge possesses the characteristics of high speed and high density, and has potential application value in the field of fusion, space propulsion and astrophysics. In this paper, the effect of positive and negative pulsed discharges on plasma characteristics are investigated and a theoretical model for analyzing the morphology of positive and negative pulsed current sheets is proposed. Positive and negative pulsed discharges are realized by changing the direction of the rectifier diode in the pulse power supply to change the direction of the recharging current. Through theoretical analysis, and measurements by using photodiode, Pearson probe, magnetic probe, HD camera, fast-framing camera and RGB image processing, the plasmas generated by positive and negative pulsed discharges are compared and investigated. Most of experimental diagnoses concentrate on investigating the plasma behavior in the coaxial gun muzzle on a microsecond-order time scale. Because radial and axial transport characteristics of plasma change little, we think, the plasma characteristics in the muzzle still depend on the characteristics of plasma in the coaxial gun. Therefore, the conclusion of the theoretical analysis of the current sheet in the coaxial gun is still valid for the plasma in the muzzle. The theoretical analysis shows that the positive pulsed current sheet presents a parabolic shape and the negative pulsed current sheet displays a convex shape, which makes the negative pulsed current sheet sweep more efficiently and a large amount of plasma is concentrated near the inner electrode, namely the cathode, so the negative pulsed plasma is denser. For the positive pulsed plasma, near the inner electrode the plasma is thin and the magnetic pressure is powerful, and near the outer electrode, the plasma is dense and the magnetic pressure is weak. Therefore, the positive pulsed plasma is faster in movement speed but easier to split, and because of its dispersion, its transport stability is not so good as that of the negative pulsed plasma. The experimental results accord with the theoretical analyses. The final conclusion shows that under the same discharge parameters, the positive pulsed discharge produced plasma is faster in movement speed but more likely to split, and the negative pulsed discharge created plasma is denser in density and more stable. Therefore, for obtaining a higher density plasma, the negative pulsed discharge is recommended, and for achieving a high-speed plasma source, the positive pulsed discharge is advised to be adopted.

The coaxial gun discharge, used as plasma jet with high density and velocity, has a wide variety of applications such as plasma space propulsion, simulation experiment of thermal transient events in the International Thermonuclear Experimental Reactor, plasma refueling for fusion reactors and a laboratory scale platform for studying astrophysical phenomena. The plasma produced in the coaxial gun can be accelerated by self-induced Lorentz force, and the ionization in the transport process can be based on " snow-plow model” in which a coaxial current sheet moves forward and sweeps a large amount of the gas between two electrodes to cause the plasma dump. Based on the measurements of discharge current, voltage, photocurrent and magnetic signal, the experimental investigation on the characteristics of plasma motion and current sheet channel distribution in the gun operated under different discharge conditions and various pressures is carried out. In this paper, it is emphasized to explore the electrical and dynamic properties about plasma in the first half-cycle of current. The results show that the plasma velocity increases with the increase of the current amplitude, and that the transport distance is proportional to the axial kinetic energy of ions when the pressure is fixed at 10 Pa and discharge current is adjusted from 35.7 kA to 69.8 kA. Moreover, in the case of high current, the plasma jet from the nozzle tends to form a new current path at the bottom of the gun. However, when the discharge current is fixed at 49.8 kA and the gas pressures range from 5 Pa to 40 Pa, the plasma motion velocity and transport distance are continuously reduced. Meanwhile, it is not found that new current paths are generated at the bottom of the coaxial gun under high pressure. The generation of the new current path is relevant to the channel impedance formed by more charged particles left at the bottom of the gun and neutral particles leaking from current sheet during discharge. Besides, a multiple discharge phenomenon is presented in experiment and the secondary discharge breakdown position occurs at the head of the electrode when the current is reversed to a positive value. Therefore, this study provides a reasonable choice of electrical parameters to obtain optimal plasma characteristics during the discharge of the coaxial gun.