No abstract

No abstract

We investigate the fabrication tolerance of novel slanted-angle silicon-on-insulator polarization rotators with asymmetric external waveguiding regions. We also minimize the input and output coupling loss between the polarization rotator and the rib waveguides through a lateral shift in the relative waveguide positions.

The heart rate response to HUET habituates. HUET produces cardiac arrhythmias; these are asymptomatic and probably of little clinical significance in young, fit individuals. It remains to be seen if this is the case with either an older, less fit cohort of people or in those undertaking longer breath holds in colder water.

In-fibre Bragg gratings (FBGs) are now well established for applications in acoustic sensing. The upper frequency response limit of the Bragg grating is determined by its gauge length, which has typically been limited to about 1 mm for commercially available Type 1 gratings. This paper investigates the effect of FBG gauge length on frequency response for sensing of acoustic waves. The investigation shows that the ratio of wavelength to FBG length must be at least 8.8 in order to reliably resolve the strain response without significant gain roll-off. Bragg gratings with a gauge length of 200 µm have been fabricated and their capacity to measure low amplitude high frequency acoustic strain fields in excess of 2 MHz is experimentally demonstrated. The ultimate goal of this work is to enhance the sensitivity of acoustic damage detection techniques by extending the frequency range over which acoustic waves may be reliably measured using FBGs.