We demonstrate rectification of ionic transport in a nanofluidic diode fabricated by introducing a surface charge discontinuity in a nanofluidic channel. Device current-voltage (I-V) characteristics agree qualitatively with a one-dimensional model at moderate to high ionic concentrations. This study illustrates ionic flow control using surface charge patterning in nanofluidic channels under high bias voltages.

Transmembrane proteins often contain nanoscale channels through which ions and molecules can pass either passively (by diffusion) or actively (by means of forced transport). These proteins play important roles in selective mass transport and electrical signalling in many biological processes. Fluidic nanochannels that are 1-2 nm in diameter act as functional mimics of protein channels, and have been used to explore the transport of ions and molecules in confined liquids. Here we report ion transport in 2-nm-deep nanochannels fabricated by standard semiconductor manufacturing processes. Ion transport in these nanochannels is dominated by surface charge until the ion concentration exceeds 100 mM. At low concentrations, proton mobility increases by a factor of four over the bulk value, possibly due to overlapping of the hydrogen-bonding network of the two hydration layers adjacent to the hydrophilic surfaces. The mobility of K+/Na+ ions also increases as the bulk concentration decreases, although the reasons for this are not completely understood.

In an aqueous solution, the surface of inorganic nanochannels acquires charges from ionization, ion adsorption, and ion dissolution. These surface charges draw counter-ions toward the surface and repel co-ions. In the presence of a concentration gradient, counter-ions are transported through nanochannels much more easily than co-ions, which results in a net charge migration of one type of ions. The Gibbs free energy of mixing, which forces ion diffusion, thus can be converted into electrical energy by using inorganic ion-selective nanochannels. Silica nanochannels with heights of 4, 26, and 80 nm were used in this study. We experimentally investigated the power generation from these nanochannels placed between two potassium chloride solutions with various combinations of concentrations. The power generation per unit channel volume increases when the concentration gradient increases, and also increases as channel height decreases. The highest power density measured was 7.7 W/m 2 . Our data also indicate that the energy conversion efficiency and the ion selectivity increase with a decrease of concentrations and channel height. The best efficiency obtained was 31%. Power generation from concentration gradients in inorganic ion-selective nanochannels could be used in a variety of applications, including micro batteries and micro power generators.