No abstract

No abstract

Abstract.A procedure to select the controlling factors connected to the slope instability has been defined. It allowed us to assess the landslide susceptibility in the Rio Beiro basin (about 10 km 2 ) over the northeastern area of the city of Granada (Spain). Field and remote (Google EarthTM) recognition techniques allowed us to generate a landslide inventory consisting in 127 phenomena. To discriminate between stable and unstable conditions, a diagnostic area had been chosen as the one limited to the crown and the toe of the scarp of the landslide. 15 controlling or determining factors have been defined considering topographic, geologic, geomorphologic and pedologic available data. Univariate tests, using both association coefficients and validation results of singlevariable susceptibility models, allowed us to select the best predictors, which were combined for the unique conditions analysis. For each of the five recognised landslide typologies, susceptibility maps for the best models were prepared. In order to verify both the goodness of fit and the prediction skill of the susceptibility models, two different validation procedures were applied and compared. Both procedures are based on a random partition of the landslide archive for producing a test and a training subset. The first method is based on the analysis of the shape of the success and prediction rate curves, which are quantitatively analysed exploiting two morphometric indexes. The second method is based on the analysis of the degree of fit, by considering the relative error between the intersected target landslides by each of the different susceptibility classes in which the study area was partitioned. Both the validation procedures confirmed a very good predictive performance of the susceptibility models and of the actual procedure followed to select the controlling factors.

This work presents the results of applying the matrix method in a Geographic Information System (GIS) to the drawing of maps of susceptibility to slope movements in different sectors of the Betic Cordillera (southern Spain). In addition, the susceptibility models built by the matrix method were compared with a multivariate statistical method, and the first method gave the best results. The susceptibility maps drawn by the GIS matrix method were validated by calculating the coefficients of association with the degree of fit between recent slope movements registered in 1997 and the different levels of susceptibility of previously drawn maps (1995)(1996) in different representative zones of the Betic Cordillera (southern Spain). The first sector studied showed excellent degrees of fit, with an error of less than 10% for all the slope failures and 3% when considering only failures of natural origin. In the second sector, the relative errors were less than 5%. In the third sector, the error hardly exceeded 6%. The results are discussed in the different zones and for each type of slope movement. In any case, these results evidence the predictive capacity of susceptibility maps drawn in GIS by the matrix method, for a great number of slope movements.

No abstract