Dye sensitised solar cells (DSSCs) use a mesoporous TiO 2 scaffold, typically assisted by an adsorbed dye, as the main active element, responsible for the photon absorption, exciton generation and charge separation functionality. The sintering process employed in the TiO 2 active layer fabrication plays a crucial role in the formation of the nanoparticle scaffold and hence the performance of a dye sensitised solar cell, as it allows the particles to form efficient inter-crystalline electric contacts to provide high electron conductivity. The sintering temperature, with typical values in the range of 450-600 °C, is of particular importance for the formation as it reduces the amount of unwanted organics between the individual crystallites and determines the formation of interfaces between the nanoparticles. Furthermore, the cell design requires a conductive transparent top electrode which is typically made of fluorinated tin oxide or indium tin oxide. Here we report on a highly spatially resolved scanning electron microscopy study including focussed ion beam (FIB) milling and energy dispersive X-ray (EDX) mapping of the distribution of all relevant elements within a DSSC subsequent to a classical sintering process. We find that the above quoted temperatures cause the Sn of the transparent conductive oxide (TCO) to migrate into the TiO 2 scaffold, resulting in unwanted alterations in the composition of the complex scaffold which has a direct effect on the DSSC performance. One potential solution to this problem is the invention of novel concepts in the manufacturing of DSSCs using lower sintering temperatures.

A substantial and stable increase of the current density Jsc of ruthenium (Ru) dye sensitized solar cells (DSC) of up to 16.18% and of the power efficiency of up to 25.5% is demonstrated in this article via plasmonic enhancement. The key aspect of this work is the use of a tailored bimodal size distribution of functionalized gold nanoparticles (AuNPs) that have been chemically immobilized onto the mesoporous titanium dioxide (TiO2) layer via short, stable dithiodibutyric acid linkers. The size distribution of the AuNPs is a result of theoretical calculations that aimed at the perfection of the absorption characteristics of the complete solar cell system over a wide range of wavelengths. The functionalization of the AuNPs serves to bind them at a close but defined distance to TiO2-particles and additionally to chemically protect them against potential corrosion by the electrolyte. Simulations of near field (enhanced absorption) and far field (scattering) contributions have been used to tailor a complex AuNPs bimodal size distribution that had subsequently demonstrated experimentally a close to optimum improvement of the absorbance over a wide wavelength range (500–675 nm) and therefore an impressive DSC efficiency enhancement. Finally, the modified DSCs are exhibiting pronounced longevity and stable performance as confirmed via long time measurements. In summary, the presented systems show increased performance compared to non plasmonic enhanced cells with otherwise identical composition, and are demonstrating a previously unpublished longevity for iodide electrolyte/AuNPs combinations.

A new microwave plasma source concept, particularly for use in the atmospheric pressure region, is presented where impedance matching is realized by a quarter-wavelength waveguide resonator structure. The waveguide is formed by a slot of 100 µm width machined into a copper sheet of 50 mm × 10 mm with a thickness of 200 µm. The slot length for a resonance frequency of 2 GHz is approximately 37.5 mm. This allows generating voltages high enough for ignition of an atmospheric plasma by this very small, simple and easy-to-fabricate structure. After ignition, the plasma extends over approximately 12 mm length of the slot, so a high electrode lifetime can be expected. Furthermore, the planar geometry of this source facilitates up-scaling to array configurations, which allows realization of a distributed source for treating large areas. Basic ignition parameters are investigated. Statistics for multiple ignitions are presented and the resulting Paschen characteristics are shown in the pressure region from 100 Pa to atmospheric pressure.

Macroscopically long wire-like arrangements of gold nanoparticles were obtained by controlled evaporation and partial coalescence of an aqueous colloidal solution of capped CTAB-Au nanorods onto a functionalised 3-mercaptopropyl trimethoxysilane (MPTMS) silicon substrate, using a removable, silicon wafer with a hydrophobic surface that serves as a “handrail” for the initial nanorods’ linear self-assembly. The wire-like structures display a quasi-continuous pattern by thermal annealing of the gold nanorods when the solvent (i.e. water) is evaporated at temperatures rising from 20°C to 140°C. Formation of both single and self-replicating parallel 1D-superstructures consisting of two or even three wires is observed and explained under such conditions.

No abstract