In this, the first part of a two-part experimental study of the behaviour of impinging jets, the mean properties of the flow field are established. Velocity profiles are given for three types of jet flow issuing from a circular convergent nozzle. Measured distributions of surface pressure are given which result when the jets impinge both normally and obliquely at various distances on several surface shapes. The pressure distributions are used to compute the radial velocity gradient at the impingement stagnation point. It is found that for normal impingement this gradient correlates with the free jet centreline velocity and half-radius at the same axial location. A fall-off in the correlated value is noted as the impingement is made oblique. Measurements of the azimuthal distribution of momentum flux in the resulting wall jet are also given. The general behaviour of all three types of jet is found to be similar at locations downstream of any local effects due to the shock waves present in the under-expanded types. A special study of the close-range impingement of an under-expanded jet containing a normal shock disk reveals a region of separated flow surrounding the stagnation point. This condition results in a negative value of the radial velocity gradient at the centreline.

An experimental study of jet impingement is completed with the presentation of the measured turbulent characteristics of the circular subsonic jet and the heat transfer rates measured when this jet impinges normal to a flat plate. The data suggest that for impingement very close to the stagnation point, the heat transfer can be computed by applying a turbulent correction factor to the laminar value calculated for a flow having the same pressure distribution as that present in the impingement region. The correction factor is found to be a function of the axial distance and not of Reynolds number. Farther away, the measurements agree well with the heat transfer estimated using the method of Rosenbaum & Donaldson (1967). At large distances from the stagnation point, the heat transfer falls off in inverse proportion with the distance.The documentation of the turbulent jet flow field includes measurements of the radial and axial velocity fluctuations and their spectra, as well as the radial distribution of turbulent shear$\overline{w^{\prime}u^{\prime}}$. In addition, measurements of the turbulence near the stagnation point and the total pressure fluctuation at the stagnation point are presented.

No abstract

No abstract

No abstract