Organometallic compounds embedded in thin films are widely used for Organic Light-Emitting Diodes (OLED), but their functionalities are strongly correlated with the intrinsic properties of those films. Controlling the concentration of the organometallics in the active layers influences the OLED performances through the aggregation processes. These aggregations could lead to crystallization processes that significantly modify the efficiency of light emission in the case of electroluminescent devices. For functional devices with organometallic-based thin films, some improvements, such as the optimization of the charge injection, are needed to increase the light output. One dual emitter IrQ(ppy)2 organometallic compound was chosen for the aggregation correlations from a multitude of macromolecular organometallics that exist on the market for OLED applications. The choice of additional layers like conductive polymers or small molecules as host for the active layer may significantly influence the performances of the OLED based on the IrQ(ppy)2 organometallic compound. The use of the CBP small molecule layer may lead to an increase in the electroluminescence versus the applied voltage.

The research focuses on multiwalled carbon nanotubes (MWNTs) functionalization with aminoethyl aminopropyl polyhedral oligomeric silsesquioxane to increase their compatibility with epoxy polymers and enhancement of interface adhesion. Functionalization of MWNTs consisted of a three-stage reaction by oxidation and further amidation through acylation with thionyl chloride. The new nanomaterials were dispersed as reinforcing agent in a weight ratio of 0.3% related to the epoxy matrix, which was further cured with an aromatic polyamine. Characterization of functionalized MWNTs by infrared spectroscopy revealed the presence of POSS cages bonded to the MWNTs through the formation of amide groups, these findings were also proved by transmission electron microscopic images. Although catalytic influence of the reinforcing agent on the curing reaction was not significant at this level of reinforcement, scanning electron microscopic images of the nanocomposites fracture surface revealed strong interfacial adhesion and crack retardant effect of POSS-functionalized MWNTs.

No abstract

Abstract

No abstract