Electrocatalytic oxidation of glycerol (GOR) as the anode reaction in water electrolysis facilitates the production of hydrogen at the cathode at a substantially lower cell voltage compared with the oxygen evolution reaction. It simultaneously provides the basis for the production of value-added compounds at the anode. We investigate earth-abundant transition-metal oxide nanoparticles (Fe, Ni, Mn, Co) embedded in multiwalled carbon nanotubes as GOR catalysts. Out of the four investigated composites, the Ni-based catalyst exhibits the highest catalytic activity toward the GOR according to rotating disk electrode voltammetry, reaching a current density of 10 mA cm −2 already at 1.31 V vs RHE, a potential below the formation of Ni 3+ . Chronoamperometry conducted in a flow-through cell followed by HPLC analysis is used to identify and quantify the GOR products over time, revealing that the applied potential, electrolyte concentration, and duration of the experiment impact strongly the composition of the products' mixture. Upon optimization, the GOR is directed toward oxalate production. Moreover, oxalate is not further converted and hence accumulates as a major organic product under the chosen conditions in a concentration ratio of 60:1 with acetate as a minor product after 48 h electrolysis in 7 M KOH, which represents a promising route for the synthesis of this highly valued product.

The modification of nickel with boron or phosphorus leads to significant enhancement of its electrocatalytic activity for the oxygen evolution reaction (OER). However, the precise role of the guest elements, B and P, in enhancing the OER of the host element (Ni) remains unclear. Herein, we present insight into the role of B and P in enhancing electrocatalysis of oxygen evolution by nickel borides and nickel phosphides. The apparent activation energy, Ea*, of electrocatalytic oxygen evolution on Ni2P was 78.4 kJ/mol, on Ni2B 65.4 kJ/mol, and on Ni nanoparticles 94.0 kJ/mol, thus revealing that both B and P affect the intrinsic activity of nickel. XPS data revealed shifts of −0.30 and 0.40 eV in the binding energy of the Ni 2p3/2 peak of Ni2B and Ni2P, respectively, with respect to that of pure Ni at 852.60 eV, thus indicating that B and P induce opposite electronic effects on the surface electronic structure of Ni. The origin of enhanced activity for oxygen evolution cannot, therefore, be attributed to such electronic modification or ligand effect. Severe changes induced on the nickel lattice, specifically, the Ni‐Ni atomic order and interatomic distances (strain effect), by the presence of the guest atoms seem to be the dominant factors responsible for enhanced activity of oxygen evolution in nickel borides and nickel phosphides.

Co3O4 nanocubes are evaluated concerning their intrinsic electrocatalytic activity towards the oxygen evolution reaction (OER) by means of single‐entity electrochemistry. Scanning electrochemical cell microscopy (SECCM) provides data on the electrocatalytic OER activity from several individual measurement areas covering one Co3O4 nanocube of a comparatively high number of individual particles with sufficient statistical reproducibility. Single‐particle‐on‐nanoelectrode measurements of Co3O4 nanocubes provide an accelerated stress test at highly alkaline conditions with current densities of up to 5.5 A cm−2, and allows to derive TOF values of up to 2.8×104 s−1 at 1.92 V vs. RHE for surface Co atoms of a single cubic nanoparticle. Obtaining such high current densities combined with identical‐location transmission electron microscopy allows monitoring the formation of an oxy(hydroxide) surface layer during electrocatalysis. Combining two independent single‐entity electrochemistry techniques provides the basis for elucidating structure–activity relations of single electrocatalyst nanoparticles with well‐defined surface structure.

Cost is a major drawback that limits the industrial‐scale hydrogen production through water electrolysis. The overall cost of this technology can be decreased by coupling the electrosynthesis of value‐added chemicals at the anode side with electrolytic hydrogen generation at the cathode. This Minireview provides a directory of anodic oxidation reactions that can be combined with cathodic hydrogen generation. The important parameters for selecting the anodic reactions, such as choice of catalyst material and its selectivity towards specific products are elaborated in detail. Furthermore, various novel electrolysis cell architectures for effortless separation of value‐added products from hydrogen gas are described.

Water electrolysis is a promising technology for sustainable hydrogen production; however, its commercialisation is limited by sluggish kinetics of the oxygen evolution reaction (OER). A potential alternative to the OER is hence required and is seen in the electrocatalytic glycerol oxidation reaction (GOR) as it offers concomitant value-added product generation from a cheap and abundant feedstock. Here, we show a facile solid-state synthesis method to obtain Ni-boride, a non-noble metal-based catalyst subsequently used in an in-depth study of the GOR product distribution as a function of key electrolysis parameters. Highly crystalline, mixed-phase Ni borides were obtained, and their synthesis was successfully optimised regarding GOR activity. Long-term chronoamperometry was conducted in a circular flow-through cell and samples were analysed by HPLC. It is shown that the formation of lactic acid, one of the most valuable GOR products, can be enhanced by optimising the electrolyte composition and the applied potential.