Acidizing high-temperature wells has always been a challenge due to problems associated with corrosion of tubulars and loss of acid carbonate dissolving efficiency. Typical acid treatments of offshore wells with extreme downhole temperatures are carried out using retarded acids, which often degrade, form insoluble salts, and require further neutralization of flowed back spent acid, resulting in loss of production days. Recently there has been a growing interest in using amino-polycarboxylic acids such as glutamic acid, N, N'-diacetic acid to treat carbonate or sandstone formations with high bottomhole temperatures. The benefits of using such acid for high-temperature acidizing are lowered reactivity, inherent chelation chemistry, better tubular protection and biodegradability.Extensive laboratory testing was conducted before a field trial of the acid. A corrosion test conducted at 395°F using highly corrosion-resistant coupons (identical to the metallurgy of the tubular) without corrosion inhibitor had a corrosion rate of 0.0068 and 0.0069 lb/ft 2 , respectively; thus, corrosion inhibitor may or may not be included in the acid used for field treatment. About 2.38 pore volumes of the acid broke through a carbonate core, dissolving 452 mg of calcium at 300°F. A computed tomography scan of the treated core showed a highly branched wormhole distribution network. The acid was found to be compatible with brines and different elastomers often used in downhole completions.The successful removal of wellbore scale and formation damage in a couple of offshore wells with high bottomhole temperatures with an amino-polycarboxylic acid is presented.Detailed laboratory testing that supported the treatment design and field application will be reported. Production enhancement as a result of the treatments, challenges with the treatment process will also be presented.

No abstract

Recently there has been a growing interest in utilizing amino-polycarboxylic acid (APC) for the treatment of limestone or sandstone formation having high bottom-hole temperatures.