In the last few decades, there are some exciting developments in the field of lithium (Li)-ion batteries from small portable devices to large power system such as electric vehicles (EVs). However, the maximum energy density of lithium-ion batteries is insufficient for the extended range of EVs propulsion. On the other hand, metal-air batteries have a greater power storage capacity, a few times more than the best performing lithium-ion batteries. Mechanically rechargeable zinc (Zn)-, magnesium (Mg)-, and aluminum (Al)-air batteries are receiving increasing attention, due to the advantages of using safe, low cost and abundant materials. If successfully developed, these batteries could provide an energy source for EVs comparing that of gasoline in terms of usable energy density. Nevertheless, there are still numerous scientific and technical challenges that must be overcome, if this alluring promise can be turned into reality. This paper provides a comprehensive overview of recent advances and challenges of metal air batteries from various elements, including air cathode, electrolyte, and anode. In addition, this review outlines the fundamental principles and understanding of the electrochemical reactions in the areas of lithium-air batteries. Finally, a summary of future research directions in the field of the metal-air batteries is provided.

Recently, the fabrication methods of orthopedic implants and devices have been greatly developed. Additive manufacturing technology allows the production of complex structures with bio-mimicry features, and has the potential to overcome the limitations of conventional fabrication methods. This review explores open-cellular structural design for porous metal implant applications, in relation to the mechanical properties, biocompatibility, and biodegradability. Several types of additive manufacturing techniques including selective laser sintering, selective laser melting, and electron beam melting, are discussed for different applications. Additive manufacturing through powder bed fusion shows great potential for the fabrication of high-quality porous metal implants. However, the powder bed fusion technique still faces two major challenges: it is high cost and time-consuming. In addition, triply periodic minimal surface (TPMS) structures are also analyzed in this paper, targeting the design of metal implants with an enhanced biomorphic environment.

Biodegradable metals (BMs) gradually degrade in vivo by releasing corrosion products once exposed to the physiological environment in the body. Complete dissolution of biodegradable implants assists tissue healing, with no implant residues in the surrounding tissues. In recent years, three classes of BMs have been extensively investigated, including magnesium (Mg)-based, iron (Fe)-based, and zinc (Zn)-based BMs. Among these three BMs, Mg-based materials have undergone the most clinical trials. However, Mg-based BMs generally exhibit faster degradation rates, which may not match the healing periods for bone tissue, whereas Fe-based BMs exhibit slower and less complete in vivo degradation. Zn-based BMs are now considered a new class of BMs due to their intermediate degradation rates, which fall between those of Mg-based BMs and Fe-based BMs, thus requiring extensive research to validate their suitability for biomedical applications. In the present study, recent research and development on Zn-based BMs are reviewed in conjunction with discussion of their advantages and limitations in relation to existing BMs. The underlying roles of alloy composition, microstructure, and processing technique on the mechanical and corrosion properties of Zn-based BMs are also discussed.

No abstract

No abstract