This study used optical coherence tomography (OCT) compared to scanning electron microscopy (SEM) and optical microscopy (OM) to evaluate qualitatively crack propagation and final fracture in restorative composite materials -Filtek Z250 and Filtek Z350 (3M ESPE) -with fiber reinforcement after cyclic loading. Samples were made using a split mold. Initially, 3-point bending tests were performed to determine the maximum force and tension at the fracture moment using samples without fiber reinforcement. Then, mechanical cycling tests were performed using samples with glass fiber embedded internally. The failures were analyzed using the 3 methods described before. OCT permitted good characterization of internal crack propagation of the dental composites, which, however, could not be visualized by either SEM or OM. OCT was proven to be laboratory research tool that is easy to use, does not require any specific preparation of the samples, and is less expensive than SEM.

The inner structure of teeth, i.e. the root canal anatomy, is very complex. However a good knowledge of endodontic architecture is the first step towards successful endodontic treatment. Optical coherence tomography (OCT) is a powerful technique to generate images of hard and soft tissue. Its images show dependency on the optical properties of the tissue under analysis. Changes in the scattering and absorption of tissues can be observed through the OCT images. In this work, we used optical coherence tomography to perform in vitro studies of the inner structure of the first molar of albino rats (Rattus norvegicus). Focusing on the pulp chamber and in the root canal, we compare the images generated with the OCT technique to the histology. We are analyzing the feasibility of OCT to help on the diagnostic of endodontic diseases.