Synthetic aperture radar (SAR) provides high-resolution images of static ground scenes, whereas processing of data containing ground object motion results in varying focusing effects. Special cases of such motion are vibration and rotation, which are closely related to each other. Their patterns may be distinctly recognizable in focused SAR intensity images as well as in a time-frequency analysis. Millimeter-wave (mmW) SAR is well suited to image vibration because its wavelength is close to typical vibration amplitudes. Through a thorough motion analysis in a standard SAR system model, we show the effects of rotation and vibration in mmW SAR theoretically and in simulated and real data.

No abstract

Ground moving target indication (GMTI) for syn-thetic aperture radar (SAR) provides information on nonstatic objects in radar imagery of a static ground scene. An efficient approach for GMTI is the use of multichannel SAR systems for a space-and time-variant analysis of moving targets. This allows the indication, correction of position displacement, and estimation of radial velocity components of moving targets in a SAR image. All three steps are possible due to a determinable Doppler frequency shift in the radar signal caused by radial target movement. This paper focuses on the millimeter wave (mmW) SAR system MEMPHIS with multichannel amplitude-comparison monopulse data acquisition and the ability to use carrier frequencies of 35 and 94 GHz simultaneously, making it a dual-frequency SAR. This paper includes mmW-specific SAR GMTI considerations, an adaptive algorithm to collect velocity and position information on moving targets with mmW monopulse radar, and a discussion on GMTI blind speed elimination and target velocity ambiguity resolving by dual-frequency SAR. To determine the capabilities of both, system and algorithm, three large-scale experiments with MEMPHIS in different environments are presented. Abstract-Ground moving target indication (GMTI) for synthetic aperture radar (SAR) provides information on nonstatic objects in radar imagery of a static ground scene. An efficient approach for GMTI is the use of multichannel SAR systems for a space-and time-variant analysis of moving targets. This allows the indication, correction of position displacement, and estimation of radial velocity components of moving targets in a SAR image. All three steps are possible due to a determinable Doppler frequency shift in the radar signal caused by radial target movement. This paper focuses on the millimeter wave (mmW) SAR system MEMPHIS with multichannel amplitude-comparison monopulse data acquisition and the ability to use carrier frequencies of 35 and 94 GHz simultaneously, making it a dual-frequency SAR. This paper includes mmW-specific SAR GMTI considerations, an adaptive algorithm to collect velocity and position information on moving targets with mmW monopulse radar, and a discussion on GMTI blind speed elimination and target velocity ambiguity resolving by dual-frequency SAR. To determine the capabilities of both, system and algorithm, three large-scale experiments with MEMPHIS in different environments are presented.Index Terms-Ground moving target indication (GMTI), millimeter wave (mmW) radar, monopulse radar, synthetic aperture radar (SAR).

Spaceborne synthetic aperture radar (SAR) systems are used to measure geo-and biophysical parameters of the earth's surface, e.g. for agriculture, forestry and land subsidence investigations. Upcoming SAR sensors such as the Japanese Phased Array L-band Synthetic Aperture Radar (PALSAR) onboard the Advanced Land Observing Satellite (ALOS) exemplify a trend towards lower frequencies and higher range chirp bandwidth in order to obtain additional information with higher geometric resolution. However, the use of large bandwidths causes signal degradation within a dispersive medium such as the ionosphere. Under high solar activity conditions at L-band frequencies, ionosphere-induced path delays and Faraday rotation become significant for SAR applications. Due to ionospheric effects, blind use of a generic matched filter causes inaccuracy when correlating the transmitted with the received signal. Maximum correlation occurs where the length of the matched filter, based on a synthetic chirp model of the transmitted signal, is adjusted to correspond to that of the received signal. By searching for the proper adjustment necessary to reach this maximum, the change in length can be estimated and used to derive variations in the total electron content (TEC) and degree of Faraday rotation within the ionosphere from all range lines in a SAR image.