No abstract

No abstract

Reducing gas turbine emissions and increasing their operational flexibility are key targets in today’s gas turbine market. In order to further reduce emissions and increase the operational flexibility of its GT24, Alstom has introduced an internally staged premix system into the GT24’s EV combustor. This system features a rich premix mode for GT start-up and a lean premix mode for GT loading and baseload operation. The fuel gas is injected through two premix stages, one injecting fuel into the burner air slots and one injecting fuel into the centre of the burner cone. Both premix stages are in continuous operation throughout the entire operating range, i.e. from ignition to baseload, thus eliminating the previously used pilot operation during start-up with its diffusion-type flame and high levels of NOx formation. The staged EV combustion concept is today a standard on the current GT26 and GT24. The EV burners of the GT26 are identical to the GT24 and fully retrofittable into existing GT24 engines. Furthermore, engines operating only on fuel gas (i.e. no fuel oil operation) no longer require a nitrogen purge and blocking air system so that this system can be disconnected from the GT. Only minor changes to the existing GT24 EV combustor and fuel distribution system are required. This paper presents validation results for the staged EV burner obtained in a single burner test rig at full engine pressure, and in a GT24 field engine, which had been upgraded with the staged EV burner technology in order to reduce emissions and extend the combustor’s operational behavior.

No abstract

No abstract