A bunch-by-bunch measurement system has been developed at Pohang Light Source II. The system consists of a four-channel button pick-up, 20 GHz sampling oscilloscope and an 800 MHz low-pass digital filter. Upon measuring a bunch-by-bunch spatio-temporal beam motion matrix over many turns, singularvalue decomposition analysis is used to reveal the dominant coupled-bunch modes. The system can diagnose injection oscillations due to kicker errors and the effect of resistive-wall impedance that gives rise to instability during operation.

The Pohang Light Source upgrade (PLS-II) project has successfully upgraded the Pohang Light Source (PLS). The main goals of the PLS-II project are to increase the beam energy to 3 GeV, increase the number of insertion devices by a factor of two (20 IDs), increase the beam current to 400 mA, and at the same time reduce the beam emittance to below 10 nm by using the existing PLS tunnel and injection system. Among 20 insertion devices, 10 narrow gap in-vacuum undulators are in operation now and two more in-vacuum undulators are to be installed later. Since these narrow gap in-vacuum undulators are most likely to produce coupled bunch instability by the resistive wall impedance and limit the stored beam current, a bunch by bunch feedback system is implemented to suppress coupled bunch instability in the PLS-II. This paper describes the scheme and performance of the PLS-II bunch by bunch feedback system.

At third-generation light sources, the photon beam position stability is a critical issue for user experiments. In general, photon beam position monitors are developed to detect the real photon beam position, and the position is controlled by a feedback system in order to maintain the reference photon beam position. At Pohang Light Source II, a photon beam position stability of less than 1 mm r.m.s. was achieved for a user service period in the beamline, where the photon beam position monitor is installed. Nevertheless, a detailed analysis of the photon beam position data was necessary in order to ensure the performance of the photon beam position monitor, since it can suffer from various unknown types of noise, such as background contamination due to upstream or downstream dipole radiation, and undulator gap dependence. This paper reports the results of a start-to-end study of the photon beam position stability and a singular value decomposition analysis to confirm the reliability of the photon beam position data.

A description of the upgraded bunch-by-bunch feedback system for time-resolved experiments at Pohang Light Source II (PLS-II) is provided. The bunch-by-bunch feedback system has been upgraded to increase the single-bunch current in the hybrid fill pattern of the PLS-II facility. The project is part of the SPring-8 and PLS-II collaboration. The main features of the upgrade are to employ a single 500 MHz analog-to-digital converter (ADC) instead of the previous four 125 MHz interleaved ADCs for 500 MHz rate, to replace a single-loop two-dimensional feedback with two independent one-dimensional feedback loops, to implement the tune measurement function with a single bunch, and mainly to implement single-bunch and stretcher control. The realization of a 400 mA hybrid fill pattern including a 10 mA single bunch demonstrates the precision of the upgraded bunch-by-bunch feedback system.