No abstract

No abstract

No abstract

A new technique using non-contact electromagnetic forces has been proposed for controlling welding buckling distortion and residual stresses in welded thin plates. The experimental results show that the method can successfully eliminate the buckling distortion and reduce the residual stresses. Three-dimensional finite element modelling has been developed to study the evolution of the stress and strain throughout the welding and electromagnetic impacts. The predicted welding distortion and residual stresses are in good agreement with the experimental results. The numerical analyses show that the reduction in distortion and stress is a result of the change of the plastic strain field in the weld region: electromagnetic impacts reduce longitudinal compressive plastic strain in the local region near the weld, and even produce the tensile plastic strain. Moreover, it is found that the residual stress can promote the changes of the longitudinal plastic strain state under electromagnetic impact.

Electromagnetic forming (EMF) is a forming process that relies on the inductive electromagnetic force to deform metallic workpiece at high speed. Calculation of the electromagnetic force is essential to understand the EMF process. However, accurate calculation requires complex numerical solution, in which the coupling between the electromagnetic process and the deformation of workpiece needs be considered. In this paper, an appropriate formula has been developed to calculate the electromagnetic force in metal work-piece in the sheet EMF process. The effects of the geometric size of coil, the material properties, and the parameters of discharge circuit on electromagnetic force are taken into consideration. Through the formula, the electromagnetic force at different time and in different positions of the workpiece can be predicted. The calculated electromagnetic force and magnetic field are in good agreement with the numerical and experimental results. The accurate prediction of the electromagnetic force provides an insight into the physical process of the EMF and a powerful tool to design optimum EMF systems.