With recent advances in technologies such as those of semiconductors and actuators, easy-to-control compact actuators have been actively applied in various fields such as factory automation and precision machining. In the automobile industry, major manufacturers and venture companies are also concentrating on electric vehicle development. Ultra-compact mobility vehicles, which exhibit an excellent environmental performance and are highly convenient for short-distance movement, are becoming popular. However, owing to cabin space limitations, it is difficult to mount systems such as power steering for assisting steering operations, and such systems are currently not installed in most ultra-compact mobility vehicles. Our research group focused on a steer-by-wire system that does not require a physical connection between the steering wheel and the wheels. Using this system, the steering wheel can be installed without any constraints, and the cabin layout can be easily changed. The reaction torque applied to the steering wheel can be expected to provide an optimum steering feel to each driver by controlling the reaction-force-generating actuator output. Drivers with different heights and arm lengths were then grouped, and arm model calculation and electromyogram measurements obtained during steering operations were used to examine the muscle burden experienced during driving owing to differences in the drivers' physiques.

An ultra-compact electric mobility vehicle cannot be equipped with power steering, and the physical burden is large. Therefore, we are continuously researching steering support for an ultra-compact electric mobility vehicle equipped with a steer-by-wire system (SBWS). The SBWS has not been widely diffused because the steering and front wheels are connected only to electric signals and do not have a high redundancy level. However, the advantage of an SBWS is that the steering reaction torque felt through the steering wheel can be controlled freely. We investigated an active steering wheel system (ASWS) that can control an appropriate steering feeling for each driver by being equipped with SBWS and evaluating the steering burden of each driver. So far, research on the SBWS has been considered to improve operability by transmitting road information and feeding back vehicle motion, however few research on an SBWS considers the physical and mental burden on the driver. In this study, we conducted a fundamental analysis of the effect of the steering reaction torque on the steering burden, focusing on the operating direction of the steering wheel.

The yaw acceleration required for circuit driving is determined by the time variation of the yaw rate due to two factors: corner radius and velocity at the center of gravity. Torque vectoring systems have the advantage where the yaw moment can be changed only by the longitudinal force without changing the lateral force of the tires, which greatly affects lateral acceleration. This is expected to improve the both the spinning performance and the orbital performance, which are usually in a trade-off relationship. In this study, we proposed a yaw moment control technology that actively utilized a power unit with a brake system, which was easy to implement in a system, and compared the performance of vehicles equipped with and without the proposed system using the Milliken Research Associates moment method for quasi-steady-state analysis. The performances of lateral acceleration and yaw moment were verified using the same method, and a variable corner radius simulation for circuit driving was used to compare time and performance. The results showed the effectiveness of the proposed system.

Mechanical vibrations adversely affect mechanical components, and in the worst case, lead to serious accidents by breaking themselves. To suppress vibrations, various studies have been conducted on vibration isolation, suppression, and resistance. In addition, technologies to actively suppress vibration have been rapidly developed in recent years, and it has been reported that vibrations can be suppressed with higher performance. However, these studies have been conducted mostly for low-order systems, and few studies have employed control models that consider the complex vibration characteristics of multi-degree-of-freedom (DOF) systems. This study is a basic study that establishes a control model for complex control systems, and the vibration characteristics of a 2-DOF system are calculated using the vibration analysis of a multi-DOF system. Furthermore, the vibration suppression performance of the 2-DOF system is investigated by performing vibration experiments.

The deterioration of ride comfort in ultra-compact vehicles has recently become an increasing concern. Active seat suspension was proposed to improve the ride comfort of ultra-compact vehicles. An active seat suspension is a vibration control device that is easily installed. The general vibration control system of the active seat suspension is fed back to the displacement and velocity by integrating the measured seat acceleration. This control has problems, such as control delay and deviation by integration. In this study, we focused on vibration control using acceleration directly. First, we established a control model that feeds back the acceleration to terminate the error occurring in the integral process and investigated the change in vibration characteristics in the case where the feedback gain of acceleration was changed. Second, the control system was analyzed to investigate the performance of the control based on the frequency characteristics. As a result, it was confirmed that the frequency response changes when the feedback gain is changed. In acceleration feedback control, ride comfort was improved by selecting a proper feedback gain because the characteristics of frequency were changed by the gain.