No abstract

No abstract

No abstract

Structural aircraft components are often subjected to more than 108 loading cycles during their service life. Therefore the increasing use of carbon fiber reinforced polymers (CFRP) as primary lightweight structural materials leads to the demand of a precise knowledge of the fatigue behavior and the corresponding failure mechanisms in the very high cycle fatigue (VHCF) range. To realise fatigue investigations for more than 108 loading cycles in an economic reasonable time a novel ultrasonic fatigue testing facility (UTF) for cyclic three-point bending was developed and patented. To avoid critical internal heating due to viscoelastic damping and internal friction, the fatigue testing at 20 kHz is performed in resonance as well as in pulse-pause control resulting in an effective testing frequency of ~1 kHz and the capability of performing 109 loading cycles in less than twelve days. The fatigue behavior of carbon fiber twill 2/2 fabric reinforced polyphenylene sulfide (CF-PPS) and carbon fiber 4-H satin fabric reinforced epoxy resin (CF-EP) was investigated. To study the induced fatigue damage of CF-PPS and CF-EP in the VHCF regime in detail, the fatigue mechanisms and damage development were characterized by light optical and SEM investigations during interruptions of constant amplitude tests (CAT). Lifetime-oriented investigations showed a significant decrease of the bearable stress amplitudes of CF-PPS and CFEP in the range between 106 to 109 loading cycles. The ultrasonically fatigued thermoset matrix composite showed a significantly different VHCF behavior in comparison to the investigated thermoplastic matrix composite: No fiber-matrix debonding or transversal cracks were present on the specimen edges, but a sudden specimen failure along with carbon fiber breakage have been observed. The fatigue shear strength at 109 cycles for CF-PPS could be determined to τa, 13 = 4.2 MPa and to τa, 13 = 15.8 MPa for the thermoset material CF-EP.

No abstract