With the exploitation of underground sources, nature receives a huge negative impact on the local environment introducing surface subsidence. A mining region needs to be observed in sequences before, during, and after coal extraction from the coal mine. Different measuring methods exist to monitor subsidence, and all of them apply various instrumentation. A choice of methodology depends on access to a field of observation and requested accuracy. Obviously, the most accurate results provide geometric leveling, but, many times, the terrain does not allow surveyors to walk over the dangerous outfields. Looking for the most adequate and feasible method, this research did a comparison between observation of the same points, applying statistical analysis of differences between the reference points heights, and tested methods. Monitoring procedure comprised utilization of total stations (TS), global navigation satellite system (GNSS), and unmanned aerial vehicles (UAV). In this paper, the Velenje coal mine was taken as a case study, and observation data were collected during 2017.

Application of new technologies and operational methodologies in mining sector targets to obtain a beneficial outcome in the long term. Instrumentation and monitoring systems for shafts, underground tunneling, storing faculties, etc. are often automated. Implemented systems provide data of mines state, integrated enhanced protection, and early warning solutions. Navigation and positioning in mines are deemed to be unstable in parts of mining tunnels when the external reference points are very far apart, thus significantly increasing the error of the internal network. This paper demonstrates a simulation of an innovative analytical and numerical solution for better positioning in the mines, yielding to increased accuracy of the control points, while reducing the time needed for performing measurements. Based on real tunnel dimensions, different control network configurations are tested. Statistical analysis of simulated environments and virtual measurements, created by combining various instrumentation, confirms cm-level positioning accuracy. The innovative approach to a mine control network design is based on involving fixed-length bars in the network design, gaining in shorter measurements sessions, but keeping homogeneous accuracy throughout the network. The concept is tested on 27 simulated network configurations, combining network points distribution and measurement accuracy of distances and angles. Obtained results and statistical analysis prove that consistent cm-level accuracy can be expected within the network. Extending the concept to space mining, which is becoming an attractive destination for chasing the rare-earth elements (REEs), this methodology will be a spin-off for space exploration mainly applicable in the Lunar lava tube positioning, which are the most secure place to settle the new human life.

No abstract

Combination of In-situ Resource Utilization (ISRU) and on-site Additive Manufacturing (AM) is one of the “outer space applied technologies” candidates where free shape fabrication from micro (e.g., tools) to mega scale (e.g. lunar habitats) will allow in coming future to settle the Moon or potentially other celestial bodies. Within this research, Selected Laser Melting (SLM) of lunar soil (regolith) simulants (LHS-1 LMS-1 and JSC-2A) using a continuous wave 100 W 1090 nm fiber laser was applied. The resulting samples were mechanically and optically characterized. A numerical multiphysics model was developed to understand the heat transfer and optimize the SLM process. Results obtained are in good agreement with the numerical model. The physical and chemical characteristics of the various materials (granulometry, density, composition, and thermal properties) have a strong impact on the AM parameters.

No abstract