Herein, a novel electrospun single‐ion conducting polymer electrolyte (SIPE) composed of nanoscale mixed poly(vinylidene fluoride‐co‐hexafluoropropylene) (PVDF‐HFP) and lithium poly(4,4′‐diaminodiphenylsulfone, bis(4‐carbonyl benzene sulfonyl)imide) (LiPSI) is reported, which simultaneously overcomes the drawbacks of the polyolefin‐based separator (low porosity and poor electrolyte wettability and thermal dimensional stability) and the LiPF6 salt (poor thermal stability and moisture sensitivity). The electrospun nanofiber membrane (es‐PVPSI) has high porosity and appropriate mechanical strength. The fully aromatic polyamide backbone enables high thermal dimensional stability of es‐PVPSI membrane even at 300 °C, while the high polarity and high porosity ensures fast electrolyte wetting. Impregnation of the membrane with the ethylene carbonate (EC)/dimethyl carbonate (DMC) (v:v = 1:1) solvent mixture yields a SIPE offering wide electrochemical stability, good ionic conductivity, and high lithium‐ion transference number. Based on the above‐mentioned merits, Li/LiFePO4 cells using such a SIPE exhibit excellent rate capacity and outstanding electrochemical stability for 1000 cycles at least, indicating that such an electrolyte can replace the conventional liquid electrolyte–polyolefin combination in lithium ion batteries (LIBs). In addition, the long‐term stripping–plating cycling test coupled with scanning electron microscope (SEM) images of lithium foil clearly confirms that the es‐PVPSI membrane is capable of suppressing lithium dendrite growth, which is fundamental for its use in high‐energy Li metal batteries.

A vertically aligned carbon nanofiber (VACNF) array with unique conically stacked graphitic structure directly grown on a planar Cu current collector (denoted as VACNF/Cu) is used as a high-porosity 3D host to overcome the commonly encountered issues of Li metal anodes. The excellent electrical conductivity and highly active lithiophilic graphitic edge sites facilitate homogenous coaxial Li plating/stripping around each VACNF and forming a uniform solid electrolyte interphase. The high specific surface area effectively reduces the local current density and suppresses dendrite growth during the charging/discharging processes. Meanwhile, this open nanoscale vertical 3D structure eliminates the volume changes during Li plating/stripping. As a result, highly reversible Li plating/stripping with high coulombic efficiency has been achieved at various current densities. A low voltage hysteresis of 35 mV over 500 h in symmetric cells has been achieved at 1 mA cm-2 with an areal Li plating capacity of 2 mAh cm-2 , which is far superior to the planar Cu current collector. Furthermore, a Li-S battery using a S@PAN cathode and a lithium-plated VACNF/Cu (VACNF/Cu@Li) anode with slightly higher capacity (2 mAh cm-2) exhibits an excellent rate capability and high cycling stability with no capacity fading over 600 cycles. Received: ((will be filled in by the editorial staff)) Revised: ((will be filled in by the editorial staff))

Monodispersed oligomers have been widely developed and used in different optoelectronic areas due to their well-defined molecular structures, high purity, and solution processability. Star-shaped oligomers are especially interesting for OLED application because of their antiaggregation abilities and stable electroluminescence. In addition, star-shaped donor-pi-acceptor conjugated molecules are known to afford good nonlinear optical and two-photon absorption properties due to the intramolecular charge transfer and cooperative enhancement effects. In this context, three generations of highly soluble 1,3,5-triazine based donor-pi-acceptor compounds, TFT1, TFT2, and TFT3, were prepared through a convergent synthetic strategy and their optoelectronic properties were fully studied, which showed distinct correlations with the structures. Closed-aperture and open-aperture Z-scan methods were employed to measure the nonlinear refractive index and two-photon absorption properties of the oligomers, respectively. TFT1 showed a high nonlinear refractive index of 4.14 x 10(-12) esu in THF solution with an excitation wavelength of 800 nm. Also, TFT1 exhibited a large two-photon absorption cross section of 234 GM and a frequency up-converted two-photon excited fluorescence with a lambda(TPEF)(max) value of 527 nm under 800 nm laser irradiation with a pulse duration of 140 fs. OLED devices using the spin-coated films of these oligomers as an active layer showed intensive blue electroluminescence with a maximum luminance of 3093 cd/m(2) at a current efficiency of 1.47 cd/A from TFT1.