No abstract

No abstract

This paper focuses on the triaxial augmentation ability of the active disturbance rejection control (ADRC) technique on the tailless layout with a fully moving wing tip to achieve high control performance for the supersonic tailless aircraft. Firstly, the stability characteristics and controllability of the flying wing layout are analyzed to determine the coupling characteristics of this kind of aircraft. Secondly, an attitude controller is designed based on ADRC theory, and the linear ADRC frequency domain analysis method is introduced to analyze the influence of the bandwidth of linear extended stator on the control system. In addition, the tuning process of the attitude control law is given. Carrier dropping simulations of flight missions under nominal condition, model parameter perturbation, and wind disturbance are conducted. The results show that the designed controller can achieve full-speed domain triaxial augmentation of supersonic flying wing. This work has the potential to significantly boost the engineering acceptability and robustness of supersonic aircraft control design in real-world scenarios. The presented cascaded ADRC approach can significantly improve the performance and robustness of supersonic vehicles.

The traditional aircraft controller design is usually based on the off-line aerodynamic model. Due to the deviation of the off-line aerodynamic model, the flight quality is difficult to meet the requirements when the aircraft is flying in the real atmosphere. To solve this problem, this paper proposes a frequency domain identification-based improved adaptive nonlinear dynamic inversion (NDI) control method (FDI-ANDI). In this paper, an online recursive aerodynamic parameter identification method in the frequency domain is first designed, and then an adaptive dynamic inversion control method based on the online aerodynamic parameter identification results is established. Finally, aiming at the problem of the slow response speed of the NDI controller, an improved adaptive dynamic inversion control law is designed by using the method of series lead correction. Compared with the traditional control method, the adaptive dynamic inversion method based on online aerodynamic identification has stronger robustness and a faster response speed in the face of model uncertainty. The final simulation analysis shows that the method has a better control effect than the traditional control method.