No abstract

This study evaluates the shear bond strength (SBS) of various resin cements to different ceramics. Composite resin cylinders of Z100 were fabricated and cemented to disks of feldspathic ceramic (Creation), leucite-reinforced feldspathic ceramic (Empress I), and densely sintered aluminum oxide ceramic (Procera AllCeram) using five resin cements: Panavia F (PAN), RelyX ARC (ARC), RelyX Unicem (RXU), RelyX Veneer, and Variolink II. SBS was measured after three days of water storage (baseline) and after artificial aging (180 days of water storage along with 12,000 thermal cycles). Failure mode of fractured specimens also was evaluated. Data were analyzed with Kruskal-Wallis and Mann-Whitney tests (α=0.05). RXU showed 1) the lowest baseline median SBS to feldspathic ceramic, which was not statistically different from PAN; 2) the lowest median baseline SBS to leucite-reinforced feldspathic and densely sintered aluminum-oxide ceramics. All cements performed similarly after aging, except for ARC (median 0.0 MPa) and PAN (median 16.2 MPa) in the densely sintered aluminum-oxide ceramic group. Resin cements perform differently when bonded to different ceramic substrates. While all test resin cements worked similarly in the long-term to feldspathic and leucite-reinforced feldspathic ceramics, only the MDP-containing resin cement provided durable bonds to densely sintered aluminum-oxide ceramic.

This study aimed to investigate the effect of the n-butanol fraction of Terminalia catappa Linn., (FBuTC) on biofilm of Candida albicans and Candida glabrata, as well as changes in color and roughness of polymethyl methacrylate resin (PMMA). The susceptibility of C. albicans and C. glabrata to FBuTC was evaluated by means of the Minimum Inhibitory and Minimum Fungicidal Concentration (MIC and MFC). PMMA acrylic resin discs (N= 108) were fabricated. For the susceptibility tests, biofilms of C. albicans and C. glabrata were developed on discs for 48 h and immersed in phosphate-saline buffer solution (PBS), 1% sodium hypochlorite (SH 1%), or FBuTC at MIC, 5xMIC, or 10xMIC. For the color and roughness change tests, the discs were immersed in distilled water, SH 1%, or FBuTC in the concentrations of 0.25 mg/mL, 2.5 mg/mL, or 25.0 mg/mL. After 28 days of incubation, color change was evaluated by spectrophotometry and roughness, by using a profilometer. The biofilms were investigated by one-way ANOVA and, the color and roughness changes (two-way ANOVA and the Tukey test; α=0.05). For both MIC and MFC the value of 0.25 mg/mL of FBuTC was observed for the planktonic cells of C. albicans and C. glabrata. Exposure to FBuTC at 10xMIC had a significant effect on the biofilm of C. albicans, showing a reduction in cell counts when compared with PBS, (p=0.001). For the biofilm of C. glabrata, the MIC was sufficient for significantly reducing the cell count (p<0.001). No important changes in color and roughness of the acrylic resin were observed, even after 28 days, irrespective of the concentration of FBuTC used (p >0.05). It could be concluded that the immersion of acrylic resin for dental prosthesis in FBuTC was effective in reducing the biofilms of C. albicans and C. glabrata without evidence of change in roughness and color of this substrate.

The clinical effectiveness of the XP Bond was excellent after 2 years of clinical service. Long-term clinical evaluations are necessary to confirm this finding.

Postoperative sensitivity is characterized by short and sharp pain, and often experienced after cementation of indirect restorations. Factors associated with the occurrence of post-cementation sensitivity include type of cement, removal of smear layer by acid-etching, aggressive tooth preparation, inadequate provisional restorations, and patient's age. Its prevention is based on either interfering with mechanoreceptor activity or occluding the dentinal tubules. Regarding the latter, application of dentin desensitizers may be effective for blocking the tubules and significantly reducing dentin permeability and consequently postoperative sensitivity. This Critical Appraisal will present available clinical data where traditional materials such as zinc phosphate and glass ionomer cements (GIC) as well as self-adhesive resin-based cements were used.