A microwave microfluidic sensor for dielectric characterization of liquids in real time is presented in this paper. The sensor is implemented in microstrip technology and consists of a symmetric splitter/combiner configuration loaded with a pair of identical split ring resonators (SRRs) and microfluidic channels placed on top of them (gap region). The sensor works in differential mode and sensing is based on frequency splitting. Thus, if the structure is unloaded or if it is symmetrically loaded with regard to the axial plane, only one transmission zero (notch) in the frequency response appears. However, if the axial symmetry is disrupted (e.g., by the presence of different liquids in the channels), two transmission zeros arise, and the difference in magnitude (notch depth) and frequency between such transmission zeros is indicative of the difference in the dielectric properties (complex dielectric constant). A circuit schematic, including transmission line sections to describe the distributed components, lumped elements to account for the SRRs and their coupling to the lines and lumped elements to model the liquid properties, is presented and validated. After proper calibration, the functionality of the proposed sensor is demonstrated by measuring the complex permittivity in solutions of deionized (DI) water and ethanol as a function of the ethanol content.

A microwave resonator is presented as a microfabricated sensor dedicated to liquid characterization with perspectives for chemistry and biology. The nanolitter range aqueous solution under investigation is located on top of the planar resonator thanks to a microfluidic channel compatible with a future lab-on-a-chip integration. The interaction between the electric field and the liquid translates into a predictable relationship between electrical characteristics of the resonator (resonant frequency and associated insertion loss) and the complex permittivity of the fluid (real and imaginary parts). A prototype of the resonator has been fabricated and evaluated with de-ionized water/ethanol mixtures, with ethanol volume fraction ranging from 0 to 20 %. Good agreement has been reached between theoretical and measured electrical parameters of the resonator. The discrepancy on the resonant frequency is estimated to 0.5 %, whereas the one on the associated transmission coefficient is lower than 1 %. This translates into a maximum relative error on the real and imaginary part of the predicted relative permittivity of less than 6.5 % and 4 % respectively, validating the principle of this accurate permittivity characterization methodology.

No abstract