This is the accepted version of the paper.This version of the publication may differ from the final published version. Permanent repository link:

No abstract

The PWM current derivative technique for sensorless control of AC machines requires current derivative measurements under certain PWM vectors. This is often not possible under narrow PWM vectors due to high frequency (HF) oscillations which affect the current and current derivative responses. In previous work, researchers extended the time that PWM vectors were applied to the machine for to a threshold known as the minimum pulse width (tmin), in order to allow the HF oscillations to decay and a derivative measurement to be obtained. This resulted in additional distortion to the motor current New experimental results demonstrate that an artificial neural network (ANN) can be used to estimate derivatives using measurements from a standard current sensor before the HF oscillations have fully decayed. This reduces the minimum pulse width required and can significantly reduce the additional current distortion and torque ripple.

No abstract

This is the accepted version of the paper.This version of the publication may differ from the final published version. Permanent ABSTRACTIn this paper a sensor system for multi-parameter electrical machine condition monitoring is reported. The proposed FBG-based system allows for the simultaneous monitoring of machine vibration, rotor speed and position, torque, spinning direction, temperature distribution along the stator windings and on the rotor surface as well as the stator wave frequency. This all-optical sensing solution reduces the component count of conventional sensor systems, i.e., all 48 sensing elements are contained within the machine operated by a single sensing interrogation unit. In this work, the sensing system has been successfully integrated into and tested on a permanent magnet motor prototype.