Sequential infiltration synthesis (SIS) is an emerging materials growth method by which inorganic metal oxides are nucleated and grown within the free volume of polymers in association with chemical functional groups in the polymer. SIS enables the growth of novel polymer-inorganic hybrid materials, porous inorganic materials, and spatially templated nanoscale devices of relevance to a host of technological applications. Although SIS borrows from the precursors and equipment of atomic layer deposition (ALD), the chemistry and physics of SIS differ in important ways. These differences arise from the permeable three-dimensional distribution of functional groups in polymers in SIS, which contrast to the typically impermeable two-dimensional distribution of active sites on solid surfaces in ALD. In SIS, metal-organic vapor-phase precursors dissolve and diffuse into polymers and interact with these functional groups through reversible complex formation and/or irreversible chemical reactions. In this perspective, we describe the thermodynamics and kinetics of SIS and attempt to disentangle the tightly coupled physical and chemical processes that underlie this method. We discuss the various experimental, computational, and theoretical efforts that provide insight into SIS mechanisms and identify approaches that may fill out current gaps in knowledge and expand the utilization of SIS.

The sequential infiltration synthesis (SIS) of group 13 indium and gallium oxides (In 2 O 3 and Ga 2 O 3 ) into poly(methyl methacrylate) (PMMA) thin films is demonstrated using trimethylindium (TMIn) and trimethylgallium (TMGa), respectively, with water. In situ Fourier transform infrared (FTIR) spectroscopy reveals that these metal alkyl precursors reversibly associate with the carbonyl groups of PMMA in analogy to trimethylaluminum (TMAl), however, with significantly lower affinity. This is demonstrated to have important kinetic consequences that dramatically alter the synthetic parameters required to achieve material growth. Ab initio density functional theory simulations of the methyl methacrylate monomer with group 13 metal alkyls corroborate association energy that is 3× greater for TMAl than for either TMIn or TMGa. As a consequence, the kinetics of activated diffusion within the film is observed to be far more rapid for TMIn and TMGa than for TMAl. Spectroscopic ellipsometry and scanning electron microscopy, in combination with Hall effect measurements of SIS-derived In 2 O 3 films, demonstrate that SIS enables rapid growth of thin films with continuous electrically conductive pathways after postannealing. Notably, SIS with TMIn and water enables the growth of In 2 O 3 at 80 °C, well below the onset temperature of atomic layer deposition (ALD) using these precursors.

Previous work has shown that introduction of hexafluoroacetylacetone (Facac) units as nonstructural ligands for the zirconia-like nodes of the eight-connected metal−organic framework (MOF), NU-1000, greatly alters the selectivity of node-supported oxynickel clusters for ethylene dimerization vs oligomerization. Here we explore a related concept: tuning of support/catalyst interactions, and therefore, catalyst activity, via parallel installation of organic modifiers on the support itself. As modifiers we focused on para-substituted benzoates (R-BA − ; R = −NH 2 , −OCH 3 , −CH 3 , −H, −F, and −NO 2 ) where the substituents were chosen to present similar steric demand, but varying electron-donating or electron-withdrawing properties. Rbenzoate-engendered shifts in the node-based aqua O−H stretching frequency for NU-1000, as measured by DRIFTS (diffusereflectance infrared Fourier-transform spectroscopy), together with systematic shifts in Ni 2p peak energies, as measured by Xray photoelectron spectroscopy, show that the electronic properties of the support can be modulated. The vibrational and electronic peak shifts correlate with the putative electron-withdrawing vs electron-donating strength of the para-substituted benzoate modifiers. Subsequent installation of node-supported, oxy-Ni(II) clusters for ethylene hydrogenation yield a compelling correlation between log (catalyst turnover frequency) and the electron donating or withdrawing character of the substituent of the benzoate units. Single crystal X-ray diffraction measurements reveal that each organic modifier makes use of only one of two available carboxylate oxygens to accomplish grafting. The remaining oxygen atom is, in principle, well positioned to coordinate directly to an installed Ni(II) ion. We postulate that the unanticipated direct coordination of the catalyst by the node-modifier (rather than indirect modifier-based tuning of support(node)/catalyst electronic interactions) is the primary source of the observed systematic tuning of hydrogenation activity. We suggest, however, that regardless of mechanism for communication with active-sites of MOF-supported catalysts, intentional elaboration of nodes via grafted, nonstructural organic species could prove to be a valuable general strategy for fine-tuning supported-catalyst activity and/or selectivity.

Non-noble-metal, thin-film oxides are widely investigated as promising catalysts for oxygen evolution reactions (OER). Amorphous cobalt oxide films electrochemically formed in the presence of borate (CoBi) and phosphate (CoPi) share a common cobaltate domain building block, but differ significantly in OER performance that derives from different electron-proton charge transport properties. Here, we use a combination of L edge synchrotron X-ray absorption (XAS), resonant X-ray emission (RXES), resonant inelastic X-ray scattering (RIXS), resonant Raman (RR) scattering, and high-energy X-ray pair distribution function (PDF) analyses that identify electronic and structural factors correlated to the charge transport differences for CoPi and CoBi. The analyses show that CoBi is composed primarily of cobalt in octahedral coordination, whereas CoPi contains approximately 17% tetrahedral Co(II), with the remainder in octahedral coordination. Oxygen-mediated 4 p-3 d hybridization through Co-O-Co bonding was detected by RXES and the intersite dd excitation was observed by RIXS in CoBi, but not in CoPi. RR shows that CoBi resembles a disordered layered LiCoO-like structure, whereas CoPi is amorphous. Distinct domain models in the nanometer range for CoBi and CoPi have been proposed on the basis of the PDF analysis coupled to XAS data. The observed differences provide information on electronic and structural factors that enhance oxygen evolving catalysis performance.