No abstract

The insulation system’s dielectric of the electric motor is very often subjected to severe electrical stress generated by the high dv/dt seen at the machine’s terminals. The electrical stress and high reflected wave transient overvoltage are even more evident in case of high-speed machines fed by high-frequency (HF) converters featuring very fast wide-bandgap devices. They are promoting the occurrence of partial discharges and consequently accelerate ageing. As this is serious issue and the main cause of the drive failure, it is important to analyse and characterise the surges at the motor terminals. Several HF models of motors have been proposed in the literature for this purpose. This article presents a survey on HF motor models, which is crucial in understanding and studying the most critical parameter identification and overvoltage mitigation techniques. Moreover, it offers a comparison of the models’ main features as well as a comparison with the experimental voltage waveform at motor terminals. A general overview of the partial discharge (PD) phenomenon is also provided, as it is favoured by HF operation and together with HF motor modelling provides key insights to the insulation ageing issue. In particular, an analysis of the effects of PWM waveform affecting insulation is given, as well as useful methods for developing strategies for the inspection and maintenance of winding insulation.

In response to climate change, governments around the world have committed to reducing greenhouse gas emissions, which contribute to global warming, through the energy transition from fossil fuels to renewable energy sources and electrification of transportation. This article outlines the design procedure for the electrification of a railway vehicle used for maintenance services on the rail network. The proposed methodology consists of the design of both an all-electric propulsion system and storage system with the aim of zero emissions when the vehicle is operating in tunnels and to minimise noise during maintenance services in cities. After highlighting the characteristics of the railway vehicle under consideration, a simulation model of the propulsion and generation system was developed in order to calculate the energy consumption of the entire railway system. Finally, experimental tests carried out on the prototype proved the effectiveness of the design procedure adopted and the proposed mathematical model, showing a good matching with the simulated results.