The synthesis of colloidal III–V quantum dots (QDs), particularly of the arsenides and antimonides, has been limited by the lack of stable and available group V precursors. In this work, we exploit accessible InCl3- and pnictogen chloride-oleylamine as precursors to synthesize III–V QDs. Through coreduction reactions of the precursors, we achieve size- and stoichiometry-tunable binary InAs and InSb as well as ternary alloy InAs1–x Sb x QDs. On the basis of structural, analytical, optical, and electrical characterization of the QDs and their thin-film assemblies, we study the effects of alloying on their particle formation and optoelectronic properties. We introduce a hydrazine-free hybrid ligand-exchange process to improve carrier transport in III–V QD thin films and realize InAs QD field-effect transistors with electron mobility > 5 cm2/(V s). We demonstrate that III–V QD thin films are promising candidate materials for infrared devices and show InAs1–x Sb x QD photoconductors with superior short-wavelength infrared (SWIR) photoresponse than those of the binary QD devices.

Self-assembly of nanoparticles into designed structures with controlled interparticle separations is of crucial importance for the engineering of new materials with tunable functions and for the subsequent bottom-up fabrication of functional devices. In this study, a series of lipophilic, highly flexible, disulfide dendritic wedges (generations 0-4), based on 2,2-bis(hydroxymethyl)propionic acid, was designed to bind Au nanoparticles with a thiolate bond. By controlling the solvent evaporation rate, the corresponding dendron-capped Au hybrids were found to self-organize into hexagonal close-packed (hcp) superlattices. The interparticular spacing was progressively varied from 2.2 to 6.3 nm with increasing dendritic generation, covering a range that is intermediate between commercial ligands and DNA-based ligand shells. Dual mixtures made from some of these dendronized hybrids (i.e., same inner core size but different dendritic covering) yielded binary superlattice structures of unprecedented single inorganic components, which are isostructural with NaZn13 and CaCu5 crystals.

Controlling nanoparticles’ (NPs) surface polarity, colloidal stability, and self-assembly into well-defined complex architectures is of paramount importance for emergent nano- and biotechnologies, and each depends strongly on the ligand shell composition and chemical nature. In this study, a series of dendritic ligands with hydrophobic, hydrophilic, and Janus surface groups was synthesized, grafted onto Au NPs, and their effects on the self-assembly behavior and surface polarity of the corresponding hybrid materials were investigated. A generalized, flexible strategy was utilized for ligand synthesis that independently introduces dendritic end groups, responsible for the surface polarity and colloidal properties, and specific surface NPs binding groups, reducing the number of synthetic steps. The dendritic ligands obtained were grafted onto NP surfaces through solution phase ligand-exchange, and the resulting NP–dendron hybrids were studied using a variety of techniques such as transmission electron microscopy, UV–vis, and small-angle X-ray scattering. When the solvent evaporation rate during self-assembly is controlled, these dendronized Au hybrids self-organize into highly ordered thin films comprised of close-packed arrays of NPs where the interparticle separation can be varied as a function of the dendritic generation and end group chemistry. Moreover, contact angle and colloidal observations revealed the strong dependence of the dendron end-group and generation on the NP surface polarity. Uniquely, the hybrid material of Au NPs and the Janus dendron exhibits controlled surface wetting, where the surface polarity is dependent on solvent exposure, revealing a surface polarity memory effect, making this material a model system for surfaces that demonstrate switchable wettability.

The development of a suitable catalyst for the oxygen reduction reaction (ORR), the cathode reaction of proton exchange membrane fuel cells (PEMFC), is necessary to push this technology toward widespread adoption. There have been substantial efforts to utilize bimetallic Pt−M alloys that adopt the ordered face-centered tetragonal (L1 0 ) phase in order to reduce the usage of precious metal, enhance the ORR performance, and improve catalyst stability. In this work, monodisperse Pt−Co nanocrystals (NCs) with well-defined size (4−5 nm) and cobalt composition (25−75 at%) were synthesized via colloidal synthesis. The transformation from the chemically disordered A1 (face-centered cubic, fcc) to the L1 0 phase was achieved via thermal annealing using both a conventional oven and a rapid thermal annealing process. The structure of the Pt−Co catalysts was characterized by a variety of techniques, including transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy in high-angle annular dark-field scanning transmission electron microscopy (STEM-EDS), small-angle X-ray scattering (SAXS), X-ray diffraction (XRD), and inductively coupled plasma−optical emission spectrometry (ICP-OES). The effects of annealing temperature on the composition-dependent degree of ordering and subsequent effect on ORR activity is described. This work provides insights regarding the optimal spatial distribution of elements at the atomic level to achieve enhanced ORR activity and stability.

Small-angle X-ray and neutron scattering provide powerful tools to selectively characterize the inorganic and organic components of hybrid nanomaterials. Using hydrophobic gold nanoparticles coated with several commercial and dendritic thiols, the size of the organic layer on the gold particles is shown to increase from 1.2 to 4.1 nm. A comparison between solid-state diffraction from self-assembled lattices of nanoparticles and the solution data from neutron scattering suggests that engineering softness/deformability in nanoparticle coatings is less straightforward than simply increasing the organic size. The "dendritic effect" in which higher generations yield increasingly compact molecules explains changes in the deformability of organic ligand shells.