Wind-driven rain (WDR) is rain given a horizontal velocity component by wind and falling obliquely. It is a prominent environmental risk to built heritage, as it contributes to the damage of porous building materials and building element failure. While predicted climate trends are well-established, how they will specifically manifest in future WDR is uncertain. This paper combines UKCP09 Weather Generator predictions with a probabilistic process to create hourly time series of climate parameters under a high-emissions scenario for 2070-2099 at eight UK sites. Exposure to WDR at these sites for baseline and future periods is calculated from semi-empirical models based on long-term hourly meteorological data using ISO 15927-3:2009. Towards the end of the twenty-first century, it is predicted that rain spells will have higher volumes, i.e. a higher quantity of water will impact façades, across all 8 sites. Although the average number of spells is predicted to remain constant, they will be shorter with longer of periods of time between them and more intense with wind-driven rain occurring for a greater proportion of hours within them. It is likely that in this scenario building element failure - such as moisture ingress through cracks and gutter over-spill - will occur more frequently. There will be higher rates of moisture cycling and enhanced deep-seated wetting. These predicted changes require new metrics for wind-driven rain to be developed, so that future impacts can be managed effectively and efficiently.

Water is a fundamental control on the deterioration of historic stone masonry, of which wind-driven rain (WDR) is an important source in the UK. Non-destructive testing methods for moisture measurement can characterise the response of masonry to short (but intense) periods of wind-driven rain. An important part of this response is how masonry functions as a system of stone units and mortar joints, in which mortar can act as a conduit for moisture. While non-destructive techniques are common in moisture surveying of built heritage, there are no agreed best practice methods for collection, handling, and visual representation of data. This study explores the comparative advantages of microwave and radar measurements in two field experiments of exposure to short (but intense) simulated wind-driven rain exposure to demonstrate when and how they are most effectively employed. A novel method of representing data as percentiles is explored to facilitate effective communication of moisture measurements. In the case of the granite wall (e.g. with components of strongly contrasting hygric properties), microwave and radar provided similar information. The average travel time of the radar signal (from the back wall reflection) demonstrated that radar can non-destructively identify water penetration through mortar joints. In the sandstone tower, the microwave measurements were able to clearly identify four different moisture regimes as a result of different intensities of WDR exposure. The radar measurements were suited to identifying distinctions between localised moisture contents within masonry units and mortar joints, which characterised how the masonry was functioning as a holistic system. The measurements on both the granite wall and the sandstone tower demonstrated that the radar is influenced by environmental conditions which influence surface condensation and equilibrium moisture contents. Representing the measurements as percentiles improved visual representation of measurements with colour scales and minimised potential skewing of normalisation and scales from extreme values/outliers. This paper demonstrates that both microwave and radar techniques can be useful for monitoring moisture in stone masonry systems. Material characteristics of the masonry system and the objective(s) of the investigation should be considered during selection of the appropriate technique(s).

No abstract

An academic–industrial partnership was formed with the aim of constructing a natural stone database for Northern Ireland that could be used by the public and practitioners to understand both the characteristics of the stone used in construction across Northern Ireland and how it has performed in use, and, through a linked database of historical quarries, explore the potential for obtaining locally sourced replacement stone. The aims were to improve the level of conservation specification by those with a duty of care for historical structures, and to enhance the quality of the conservation work undertaken by architects and contractors through their improved knowledge of stone and stone decay processes.