In this work, we have reported a nanocomposite, composed of a BiFeO3 nanowire and reduced graphene oxide (BFO-RGO), as an electrode material for a high-performance supercapacitor. A facile hydrothermal method was employed to prepare BFO-RGO nanocomposite. The electrochemical measurements were performed by cyclic voltammetry, galvanostatic charge/discharge measurements, and electrochemical impedance spectroscopy. The specific capacitance of the BFO-RGO nanocomposite was 928.43 F g–1 at current density 5 A g–1, which is superior to that of pure BiFeO3. Additionally, this nanocomposite shows good cyclic stability, and ∼87.51% of specific capacitance is retained up to 1000 cycles. It also exhibits a high charge density of 18.62 W h kg–1 when the power density is 950 W kg–1. These attractive results suggest the potential of BiFeO3 nanowire-RGO nanocomposite as an active material for the construction of a high-performance supercapacitor electrode. To the best of our knowledge, this is the first time the application of BiFeO3 nanowire-RGO nanocomposite as a supercapacitor has been reported.

Here, we report a facile hydrothermal synthesis method to prepare BiFeO3 nanowire-reduced graphene oxide (BFO-RGO) nanocomposites. The unique properties of 2-D reduced graphene oxide (RGO) and 1-D BiFeO3 nanowires (BFO) were exploited to design nanocomposites to obtain high performing microwave absorber materials. The composite with 97 wt % BFO and 3 wt % RGO exhibited minimum reflection loss value of −28.68 dB at 10.68 GHz along with the effective absorption bandwidth (≥ −10 dB) ranging from 9.6 to 11.7 GHz when the absorber thickness was only 1.55 mm. First-principles calculations based on density functional theory (DFT) of BFO, graphene, and BFO-RGO nanocomposites were performed to obtain information about their electronic structures to interpret their complex permittivity and its derived properties. To the best of our knowledge, this is the first time investigations on microwave absorption properties of the BiFeO3 nanowire and BFO-RGO nanocomposites have been reported, and this nanocomposite shows its potential to be used as a lightweight, high performing microwave absorber in the X-band region.

Herein, we report for the first time synthesis of a BiFeO3 nanowire-reduced graphene oxide nanocatalyst (BFO–RGO) using a hydrothermal method.

Here, an ‘in situ’ co-precipitation reaction method has been reported for the preparation of CoFe2O4–RGO (CF–RGO) nanocomposites.

Here, we report an ‘in situ’ co-precipitation reduction based synthetic methodology to prepare CuFe2O4 nanoparticle–reduced graphene oxide (CuFe2O4–RGO) nanocomposites.