Nanostructured bilayered V2O5 was electrochemically deposited within a carbon nanofoam conductive support. As-prepared electrochemically synthesized bilayered V2O5 incorporates structural water and hydroxyl groups, which effectively stabilizes the interlayers and provides coordinative preference to the Mg(2+) cation in reversible cycling. This open-framework electrode shows reversible intercalation/deintercalation of Mg(2+) ions in common electrolytes such as acetonitrile. Using a scanning transmission electron microscope we demonstrate that Mg(2+) ions can be effectively intercalated into the interlayer spacing of nanostructured V2O5, enabling electrochemical magnesiation against a Mg anode with a specific capacity of 240 mAh/g. We employ HRTEM and X-ray fluorescence (XRF) imaging to understand the role of environment in the intercalation processes. A rebuilt full cell was tested by employing a high-energy ball-milled Sn alloy anode in acetonitrile with Mg(ClO4)2 salt. XRF microscopy reveals effective insertion of Mg ions throughout the V2O5 structure during discharge and removal of Mg ions during electrode charging, in agreement with the electrode capacity. We show using XANES and XRF microscopy that reversible Mg intercalation is limited by the anode capacity.

α-MnO2 is a promising material for Li-ion batteries and has unique tunneled structure that facilitates the diffusion of Li(+). The overall electrochemical performance of α-MnO2 is determined by the tunneled structure stability during its interaction with Li(+), the mechanism of which is, however, poorly understood. In this paper, a novel tetragonal-orthorhombic-tetragonal symmetric transition during lithiation of K(+)-stabilized α-MnO2 is observed using in situ transmission electron microscopy. Atomic resolution imaging indicated that 1 × 1 and 2 × 2 tunnels exist along c ([001]) direction of the nanowire. The morphology of a partially lithiated nanowire observed in the ⟨100⟩ projection is largely dependent on crystallographic orientation ([100] or [010]), indicating the existence of asynchronous expansion of α-MnO2's tetragonal unit cell along a and b lattice directions, which results in a tetragonal-orthorhombic-tetragonal (TOT) symmetric transition upon lithiation. Such a TOT transition is confirmed by diffraction analysis and Mn valence quantification. Density functional theory (DFT) confirms that Wyckoff 8h sites inside 2 × 2 tunnels are the preferred sites for Li(+) occupancy. The sequential Li(+) filling at 8h sites leads to asynchronous expansion and symmetry degradation of the host lattice as well as tunnel instability upon lithiation. These findings provide fundamental understanding for appearance of stepwise potential variation during the discharge of Li/α-MnO2 batteries as well as the origin for low practical capacity and fast capacity fading of α-MnO2 as an intercalated electrode.

procedures, elemental analysis, tables of DFT results, and notes on cell design and construction (PDF).

2,5-Dimethoxy-1,4-benzoquinone (DMBQ) was reinvestigated as a cathode material with magnesium electrolytes that are capable of plating/stripping magnesium for rechargeable magnesium-ion batteries. Two electrolytes, the magnesium bis(trifluoromethylsulfonyl)imide mixed with MgCl2 in dimethoxyethane (Mg(TFSI)2-2MgCl2 in DME) electrolyte, and the Mg(TFSI)2 in diglyme were selected. The Mg(TFSI)2-2MgCl2 in DME enabled Mg-DMBQ batteries with a discharge potentials above 2.0 V vs Mg/Mg2+, which is superior to the previous reported potential in Mg-DMBQ batteries with conventional magnesium salt-based electrolytes (1.1 V, vs Mg/Mg2+), and also excels the well-known Chevrel phase Mo6S8 in magnesium-ion batteries (1.2 V, vs Mg/Mg2+).

No abstract