A simple flame treatment method was explored to construct micro/nanostructures on a surface and then fabricate a biomimetic superhydrophobic surface at a relatively low cost. SiO 2 -containing polydimethylsiloxane (PDMS) was used as a substrate. The PDMS replicas with various micropatterned surfaces were fabricated using grass leaf, sand paper, and PET sheet with parallel groove geometry as templates via PDMS replica molding. The PDMS replica surfaces with micron structures and the surface of a flat PDMS sheet as a control sample were further treated by flame. The fabricated surfaces were characterized by scanning electron microscopy and water contact angle measurements. The effect of surface microstructures on the transparency of PDMS was also investigated. The studies indicate that the fine nanoscale structures can be produced on the surfaces of PDMS replicas and a flat PDMS sheet by a flame treatment method, and that the hierarchical surface roughness can be adjusted and controlled by varying the flame treatment time. The flame-treated surfaces of PDMS replicas and a flat PDMS sheet possess superhydrophobicity and an ultra-low sliding angle reaching a limiting value of 1°, and the anisotropic wettability of the PDMS replica surface with oriented microgroove structures can be greatly suppressed via flame treatment. The visible light transmittance of the flame-treated flat PDMS surface decreases with prolonged flame treatment times.

Amphiphilic polyurethane elastomers (APUE) were synthesized using a two-step polyaddition reaction based on the hydroxyl-terminated polydimethylsiloxane (PDMS) and polyethylene glycol (PEG) soft segments with the molecular weights (M w 's) of 2000 and 1000, respectively. The effects of the PDMS/PEG contents on the properties and structures of the APUE were investigated. It was found that the APUE possessed high elongation, moderate tensile strength, and good thermal properties. In addition, the APUE showed tunable oxygen permeability (Dk) and water vapor transmission rate (WVTR), and a similar WVTR to that of skin could be obtained for the optimized sample (APUE2). Importantly, APUE also exhibited excellent antibacterial efficacy against two kinds of bacteria along with impressive cytocompatibility. All of the results demonstrated that the synthesized APUE will hold substantial potential for biomaterial applications.

A novel type of chemically and physically double-crosslinked network (CPDN) polymer hydrogels with excellent self-healing and mechanical properties were prepared and investigated.

The prepared zwitterionic sulfobetaine nanocomposite hydrogels can autonomously repair incisions or cracks at ambient temperature without the need for any stimulus and possess excellent mechanical properties.

No abstract