Soil strength is an important quality of agricultural soils prone to traffic. Surface hardness (SH) measured by the clegg impact tester (CIT) was evaluated as an indicator for assessing soil strength. Proctor tests were performed on a diverse range of soils to examine the relationships between bulk density (BD), penetration resistance (PR), SH and water content. All three indices showed typical response curves with increasing water content, with notable differences among the soils. Maximum dry bulk density (MDBD), peak penetration resistance (PPR) and peak surface hardness (PSH) showed values of 1.98 Mg·m −3 , 8.2 MPa and 248 Cmax for Piarco, River Estate and Piarco respectively. Corresponding critical moisture contents (CMC) were much greater for MDBD compared to PPR and PSH. SH showed a significant positive correlation with PR, but not BD. Further divulgence into the relationships between SH and other soil properties as well as crop response will facilitate greater use of the CIT.